To the page content

Behringer DI20

974

Active 2-Channel DI boxActive 2-Channel DI-Box / Splitter, with whose help signals with high impedance - e.g. from guitars and basses - can be connected directly to a mixer or recording system.

The ULTRA-DI DI20 is a one-of-a-kind DI (Direct Injection) box that can convert up to two separate, unbalanced ¼ " TRS lines into two balanced XLR outputs. It also offers a 2-channel / link mode for flexible use as a mono-, 2-channel box or splitter. In link mode, channel 1 can be output simultaneously via the two balanced XLR outputs as well as via an unbalanced jack (6.3 mm). The 3-position input attenuator can accommodate input levels of up to +48 dBu and a "Ground Lift" switch eliminates ground loops. The power supply can either be done with a battery (9 V) or with phantom power (48 V).

  • Jack input
  • XLR Out
  • -20 / 40dB PAD (up to 3000 W)
  • Operable via battery (9V) or phantom (15-52V)
  • With the ground switch ground loop can be eliminated
  • Battery-off switchable
  • Additional Split mode (channel 1 assigns signal to both XLR outputs)
  • In link mode Channel 2 outputs the signal from channel 1 balanced
  • Robust housing
Available since February 2003
Item number 160358
Sales Unit 1 piece(s)
Multi-Channel Unit Yes
Channels 2
Active / Passive Active
19" No
Pad switchable Yes
Gnd/Lift switchable Yes
Powered by battery Yes
Speaker Simulation No
275 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
92
Visitors
are looking at this product
7
Sales Rank
in DI Boxes

974 Customer ratings

4.2 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

sound

quality

426 Reviews

h
Unpopular opinion - Behringer Rocks!
howlingwolf 22.04.2020
Possibly one of the best price-for-value audio product on this whole website and in general. I love this DI box and all the additional functions like 2CH and link mode, it's extremely versatile, and it does the job more than good. You can hear a big difference in sound when recording or monitoring a bass or electric guitar through your interface if you insert this DI box before your Line in and for this money you shouldn't hesitate. If you're an audio engineer, even if you have more expensive DI boxes, this can make a great emergency replacement as it's unlikely you'll have any problems. I've used this DI box for home recordings, in the studio and live concerts on big festival stages - it's trustworthy and road tested.
I have two of them so far.

Generally speaking, Behringer is capable of creating great devices, and just because they are not always as expensive as expected it doesn't mean that they are bad. If you look carefully you'll see their racks even in Abbey Road so, if you want a piece of advice, trust your ears rather than internet reviews!
features
sound
quality
7
0
Report

Report

R
Versatile little box
Roshan 06.03.2014
This little box from Behringer is a very handy addition to the home studio, mobile record rig or stage setup.

I have 2 of these and use them for live gig recordings with my mobile rig where I often don't know what I'm going to encounter until I arrive. These little boxes are very versatile and allow me to connect a wide range of instruments to my recording interface via balanced connections for best low noise performance with long cable runs.

For example, I've used them as classic DI boxes, to insert between instrument and amplifier and to simultaneously take a balanced line level output out to the interface, I've used a single unit to feed an unbalanced stereo output from a keyboard into twin balanced XLR inputs. I've used them to interface with a drum machine via the headphone output (the drum machines' main outs were broken).

They are powered via phantom power from the XLR connection or via 9V battery. You can connect instrument amplifier speaker outputs to them and use the inbuilt attenuator to match the signal. Other features include a ground lift, and the ability to use as either a twin channel single in single out DI box, or a single channel box with single in, multiple out.

Compact and lightweight, they seem rugged enough in day to day use, no issues with noise or build quality, and of course, excellent value.

To sum up, don't be put off by cheap reputation these are very versatile little tools and very competitively priced.
features
sound
quality
3
0
Report

Report

E
Handy to have in your toolbox, beware of distortion
E-Engineer 08.06.2020
I carry one around in my gig bag since it is small and versatile.
There is one attenuation knob which acts on both inputs, so I primarily use it for stereo sources such as keyboards, tablets, laptops and DJ booth.
I have had mixed results with guitar/bass, the unit distorts to easy in my opinion, forcing you to pad the input even though the signal is not that hot.
It is not as well build as the DI100 (which you can throw from the top of a building and it will still work) and you should keep it away from mains transformers.
For the price, the size and the features it is a good unit.
features
sound
quality
2
0
Report

Report

M
ok quality
Maskov 26.06.2020
well,,it works,,but,,that noise,,cracling sound simetimes,,i cant recomend it for studio use but for live as a backup di i can,,biggest problem is pad switch when i set -20 db noise is at same level but sound is quieter..with some modification it could be fixed..it fixes hum noise but something inside make whole new noise, like white noise poor components perhaps
features
sound
quality
2
0
Report

Report