Doepfer A-149-2

Eurorack module

Expansion module for the A-149-1 (Article Nr: 199098)
Supplies 8 digital, random voltages
Eurorack format
Width: 4 HP
Depth: 35 mm
Power requirement: +40 mA (+ 12V) / -10 mA (-12V)

Note: Must be mounted directly to the left or right of the A-149-1, as an internal connection must be established between both modules. Can not be operated without the A-149-1!

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since December 2006

Item number 199100

Sales Unit 1 piece(s)

Width 4 TE / HP

Show variations of this product

Doepfer A-149-2

Doepfer A-149-2 Eurorack module * Expansion module for the A-149-1 (Article Nr: #199098#) * Supplies 8 digital, random v...

758 kr

to the product

132

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

1.129 kr

to the product

119

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

444 kr

to the product

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

1.269 kr

to the product

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

2.799 kr

to the product

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

758 kr

to the product

Doepfer A-101-2 Vactrol Lowpass Gate

Doepfer A-101-2 Vactrol Lowpass Gate Vactrol lowpass gate * Combination of low-pass filter (LP) and VCA * Based on the i...

1.269 kr

to the product

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

1.022 kr

to the product

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

1.525 kr

to the product

Doepfer A-180-3 Dual Buffered Multiple

Doepfer A-180-3 Dual Buffered Multiple Synthesizer module * Double buffered 1-in-3 multiple * For buffering and duplicat...

629 kr

to the product

Doepfer A-156 Vintage Edition

Doepfer A-156 Vintage Edition Dual Control Voltage Quantizer * Vintage edition with black front plate * Converts a conti...

1.658 kr

to the product

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

1.529 kr

to the product

758 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Expander Modules

This is what customers who viewed this product bought

Shakmat Modular Bard Quartet Expand

1.269 kr

bought

Intellijel Designs Gx

999 kr

14 Customer ratings

5 14 Customers 4 0 Customers 3 0 Customers 2 0 Customers 1 0 Customers

5 / 5

handling

features

sound

quality

Review guidelines

5 Reviews

Doepfer random voltage extender module.

Jonathan64 11.09.2013

This module cannot be used on it's own, but rather is intended to provide additional facilities for the A-149.1 which generates random voltages (which can be quantised). It provides eight digital outputs each of which switches at random but synchronised to the clock input of the A-149.1. I have found it useful for generating random "note on" and "note off" signals when creating random self-generating musical sequences (Stochastic music). Used in combination with a logic module A-166 a useful range of signals can be generated at different time intervals to make the music more interesting to the ear, rather than all the notes being the same length. There are numerous other uses for randomly generated logic signals in a modular system apart from triggering envelope generators.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Show translation

Show original

Unfortunately there was an error. Please try again later.

Compagnon gates aléatoires du 149-1

AnalogGuy 06.11.2019

Sans le 149-1 ça ne marche pas. Donc soit vous avez le premier et c'est une super option pour en plus générer des gates aléatoires contrôlées par les réglages du 149-1, soit vous n'avez pas le 149-1... et ce module vous sera inutile... mais alors jetez un oeil sur le 149-1...

handling

features

sound

quality

Report

Show translation

Show original

Unfortunately there was an error. Please try again later.

Add some randomness to your rig

Monkeproggs 18.11.2020

This module sends gate/trigger signals at random when connected to Doepfer A-149-1. You feed the A-149-1 with a clock and this module spits out random gates/triggers each clock advance.
" It makes available 8 digital random
voltages (i.e. only low/high states like a gate signal)."
This module doesn't send out any random voltages, it sent out 10V on random outputs.
But it is very useful for triggering gates/filters/notes at random. I use it often to trigger the gates in my Behringer Multiple/gate Switch, thereby allowing modulation through at random. I also use it with a Logic circuit to decrease the probability of a output going high. For instance I have one output from this connected to an AND gate and another from my clock divider 1/13 output to the same AND gate. This example would giva a probability of an event happening 1/13+1/X.
The randomness of the outputs are fairly even and sometimes if feels like it is running through a chain, but for the most part it does the job.
I'm very pleased with this module and would higly recomend it to anyone interested in Generative systems or daring explorers.

The only downside is that it seems that all outputs are more prone to turning high than low so if you just use this as a trigger it will be firing a lot. So perhaps buy a logic module as well.

handling

features

sound

quality

Report

Show translation

Show original

Unfortunately there was an error. Please try again later.

auch gut

T. aus H. 06.06.2016

als Ergänzung zu A-149-1. Die Ausgänge sind Gates und werden durch den Clockinput des A-149-1 angetrieben.
Sehr brauchbar, um damit z.B. 8 Sequencer eines Z8000 anzutreiben.
Die Gates bleiben 'oben', solange sie an sind. Falls man damit zufällig Noten triggern möchte, könnte man das mit einem A-162 dahinter bewerkstelligen.

handling

features

sound

quality

Report

Read all reviews

Doepfer A-149-2

Eurorack module

This is what customers who viewed this product bought

14 Customer ratings

You have to be logged in to rate products.

5 Reviews

Smart Navigator

Served with love!

Doepfer A-149-2

Eurorack module

This is what customers who viewed this product bought

Accessories & matching items

14 Customer ratings

You have to be logged in to rate products.

5 Reviews

Compare options

Smart Navigator