I fitted this Freeway switch into my .strandberg* Boden Original 6, which as stock was setup with dual humbuckers and a five way switch. The standard setup didn't include both humbuckers, or the split bridge humbucker, and the diagram provided by Freeway (on their website) made this a doddle to change over (far fewer contacts to manage too!).
Now I have the following options:
Lower Position 1: Neck Humbucker
Lower Position 2: Both Humbuckers
Lower Position 3: Bridge Humbucker
Upper Position 1: Neck Coil Tapped, Outer Coil
Upper Position 2: Neck and Bridge Coil Tapped, Outer Coils
Upper Position 3: Bridge Coil Tapped, Outer Coil
It physically seems to be quite large, mainly because it's boxy, but it's actually a slightly better fit in the Boden's cavity than the original super-style switch (which barely fit to the extent that contacts could short on the cavity cover!), as it's slightly lower.
The main thing to watch for when fitting is that the slot for the blade is wide enough to allow the sideways motion to change between 'bank 1' and 'bank 2', or 'upper' and 'lower'.
All in all, it's a great quality switch that's easy to wire, if quite expensive.