Graph Tech PQ9200CO Acoustic Saddle

I haven't checked the height but the width and length is a perfect replacement for the stock saddle that came with my Epiphone Hummingbird Artist. Will complement the saddle with a set of excellent Tusq bridge pins (PP-1122-00). Delivery and packaging great as always with Thomann.

In my experience a Tusq nut and saddle can make a big difference in the tone of an acoustic guitar. I have not only gotten much better sustain and cleaner open notes, but also a much more harmonically rich tone on each guitar I have changed out the factory nut and saddles on.

Be prepared to do a little sanding as these are purposely made a little large. But with a little patience, a flat surface, and some sandpaper you can get a perfect fit!

Bought it to replace the saddle on my acoustic guitar (used after almost ten years)
Fits easily to the guitar after very few passes on fine sanding paper.
Brings a good bright sound to my guitar (with a Graph tech Tusq nut too)
Should have done it earlier!

it sat great on my Taylor acoustic guitar with a bit of tuning I got a well balanced bridge

The original saddle is 8cm long by 3mm thickness....this new one fitted perfectly and effortless in the slot.

I needed this one cause the B string was a little high on the 12th fret and this saddle corrected the problem

It is a low price product, but does it's job. Original saddle on my guitar became worn out, so this was perfect replacement. You just have to attach strings accurately and with care. If you change strings often, you have to be careful to place it in exact place on saddle as before, or else new string will 'sit' on new spot on saddle.

Radius 12, Taylors have radius 15.
So Taylor GsMini needs the PQ9044 Radius15, I think. Or a saddle for Larrivee with Radius14 PQ9220. Or PQ9266 R14 b band compensated.
Thomann should get the 9044 and the 9220 in store.