To the page content

Jaspers 4R-150B

18 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

handling

quality

14 Reviews

Jaspers 4R-150B
6.098 kr
Free shipping incl. VAT
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
A
A reliable stand
Anonymous 30.01.2016
I use Jaspers 4R-150B for housing all my current home studio. In the lower rack lies a 28kg Korg Triton Extreme 88. In the rest racks lie four sound modules, a mixing desk, Midisport 4x4, a 21" monitor, a laptop and a Mininova leaving enough space for even more.

The stand is unbelievable light and rolls on its wheels with no difficulty even when loaded. It is also very stable.
Assembling is easy and quick and doesn't take more than 10 minutes. Mind though that you should spend some 15 minutes more before you do it in order to be sure that you assemble it right and as your needs impose. Expect no help from a manual or from Jaspers website. In the box there is only a generic photo and a couple of words that don't give any serious hint.

The holder stoppers are lame. They are from plastic (why Jaspers?) and although they can be easily replaced there are no spares in the box you receive. Two of them came to me broken and Thomann has no stock of them so they have to call Jaspers. You will receive some spare adhesive felts which will come handy sooner or late since there not of the highest quality. Two of mine came damaged.

Pros:
Lightweight, easy assembly, sturdy, good quality wheels

Cons:
Plastic (!) stoppers, a bit pricey, no assembly instructions

In general I think you won't regret buying it although a few minor changes would make it even better.

In the link below you can find a very interesting article of Keyboard magazine and also some assembly help:

http://www.keyboardmag.com/accessories/1187/jaspers-keyboard-stands-the-solution-for-stacking/29460
stability
quality
handling
2
0
Report

Report

n
Very reasonable design but patience is needed during assembly
nobuddy 28.09.2018
I bought the Jaspers 4R-150 with the intention of using it as a 3R stand, where the second tier would have additional support as per first tier. A spirit level is needed to properly arrange the assembly without frustration. Be careful to double-check your work before placing your machines, there are many points to tighten. Once assembled, the unit is excellent. I used shelving material across each tier with a 90 degree bracket on the front edge of each shelf to stop machines from sliding. With appropriate shelves and support, you will save money on the extra brackets for each piece of gear.
stability
quality
handling
3
0
Report

Report

F
Solid as a Rock
FailedMuso 01.08.2020
Typically brilliant stand from Jaspers with all the sturdiness and rigidity you come to expect from the leaders in keyboard stand technology.

My only quibble is that if you set the bottom tier to the lowest possible level, the 60cm arms no longer reach the rear support bar and Jaspers don't supply locking rings for this tier, so have to be bought separately otherwise you may find the keyboard tipping if it's a heavy one.. If Jaspers supplied these as standard, or featured a pair of 70cm arms, this would be perfect.
stability
quality
handling
1
0
Report

Report

K
Amaaaaazing
K-Tech 05.05.2021
Amaaaaazing Stand...highly recommended... Tnx a lot
stability
quality
handling
0
0
Report

Report

A
Value for money
A.S.STEFANAKIS 07.12.2023
Used for two keyboards and desktop computer with large screen. The coresponding "studio" furniture is very expensive even to think about.
Top self was put in the back and with the third they support a self (from IKEA or other) and the other two support two keyboards. A small laptop table can be used for pc-keyboard or a use dedicated part. It solved the computer problem which requires a piece of furniture or a table with min cost. The pc has software instruments which can be synchronized with keyboards in an integral way. Nice for home studio. One disadvantage. It is large as it can handle 88-note keyboards and needs a whole wall to stand against at not too much footprint. But it makes sense to do it. Most configurations can be obtained with such a flexible equipment. The size depends on the keyboards though. Perfect ergonomy: Height and position of keyboards, height of computer screen, height of speakers (independent stand but fit inside). Sturdy. Wheels are removing anxiety in a minute with the whole build going back and forth with a finger. 10/10
stability
quality
handling
0
0
Report

Report

A
Wonderful, sturdy stand - arrived quickly
AviF 10.02.2021
I placed 6 of my synthesizers on it, my main being the largest and most heavy, on the bottom layer - after putting it together, which was fairly simple to do. Its been a couple weeks now, I think. Very happy with this stand! Thank you so much - and thank you Jaspers - these specific type of multi synth stands seem harder to find in the USA.
stability
quality
handling
0
0
Report

Report

M
Fantastic, adjustable, flexible, solid, and dependable, BUT be sure to inspect and retighten the bolts!
MidIslandClimber 30.01.2024
This was a solid stand for me for 3 years, top manufacturing and flexibility. I have been very happy with the investment in this model! But, I would encourage everyone to inspect and retighten everything on your rack, once or twice a year. Recently I rearranged my stand and shifted some gear across the bars and changed the height of the middle two racks, and after having been stable for the preceding 20 hours, something happened while I wasn't present in the room. Something either slowly slipped down and shifted or a Tube Clamp Joint failed, and my stand tipped forward onto the hardwood floor, dumping all my gear with a few unfortunate but repairable casualties. Inspecting afterwards, a fiber-reinforced Tube Clamp Joint was found to fractured/broken, but I can't say if it just failed (unlikely) or if it was broken by the force of the stand hitting the floor (more likely due to the torque & impact). Previously, I had inspected the center of gravity while I was loading my gear onto the rack, and the lowest shelf had a similar amount of weight on it (~30kg) as it had for the previous 3 years, and it had been stable for the preceding 20 hours, so it's a mystery. I have ordered some additional Jaspers stand parts to replace the damaged Tube Clamp Joint, and provide some additional cross bracing and redundancy for potential future slipping. But all in all, I have been super happy with this stand! :)
stability
quality
handling
0
0
Report

Report

JE
Jaspers Stand
Jaspers ECR 14.05.2019
Very well made, easy assemble, this is a quality product
Been searching for something like this for a while and even though had to ship to Australia from Germany it was worth it
stability
quality
handling
0
0
Report

Report

Jaspers 4R-150B