Customer reviews about K&M 216 Thread Adapter

T

Good Thread Adapter

TomislavK 28.08.2020

This is special screw Thread Adapter that i have buy to try to arrange different heights for MS recordings with two microphones mounted on double microphone bar stand and it works together with standard thread needed for K&M stands. You can use more of them in combo to get heights you need for you microphones and projects.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

VV

Does what it's supposed to

Victor Valiant 17.06.2023

I've used this 'K&M 216 thread adapter', to mount the 'K&M 211/1 boom arm' which is 3/8 thread, to an 5/8 threaded mic stand.

It does it's job well for over 2 years now.
The adapter is strong & robust, and makes a flush tight fit between the two. The internal threads/grooves holds well and doesn't slip.

The outside texture makes it easy to grip, screw on & tighten by hand.
The un-screwing after use might be a bit rougher for the more delicate finger tipped among us.
One might opt to use pliers to un-screw for the sake of comfort.
But over-tightening is far from necessary.

Too bad it's not available in black.
Since most mic stands & boom arms are black, it would've made this adapter less visible to the eye.
Something the R&D at K&M should consider ;)
Hopefully with reading this review ;D
Cheers

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

H

does what it is inteded for

HowieCapowie 26.08.2019

Needed two adapters to be used for some cheap mic stands to attach a better quality booms. works perfectly. Helped transform some mediocre mic stands to be used as overheads for the drums. Not a perfect solution but it worked. a great tip if you have some ok mic stand, is to buy some of the K&M boom and attach them to the mic end of your mic stand to add some additional angle adjustments.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

C

Excellent value for money

CC1984 24.01.2021

Does exactly what you want it to, at a price that doesn't break the bank. Couldn't find an equivalent at this price in the UK. If you buy two of these then it's cheaper even including the postage to UK !

Quality is solid and the thread is very easy to get on the stand

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

s

Useful tool for my recording setup

stream 30.09.2021

It's very useful tool for me. In my case, I bought this adapter for my recording setup (XY).

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

n

Utile et simple

numero66 22.03.2021

Un petit adapteur bien pratique. En effet pour tous ceux qui veulent fixer en appareil photo sur un stand micro dun generation, ce petit adpateur est necessaire.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Worked great

SigvardsD 07.07.2023

Worked great with my mic stand

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

LL

Well, not so much to review, heh?

Lucas Langen 18.05.2021

I used this one as a replacement adaptor to my Behringer B205D so I could use on a mic stand.
Fits almost perfectly (had to made some adjustments).

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K

a must have!

Koenraad 11.05.2022

You might think that you won't need this adapter... but 100% sure you will be wrong one day. Hopefully not while making a live-recording.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

C

Indispensable object to have in your arsenal

Christopher2751 15.08.2014

These Thread Adapters have saved the day on numerous occasions. They convert the US standard 3/8" to the UK standard 5/8". Sometimes microphone stands come with the wider 3/8" end, or perhaps you'll forget to add the flange adapter to your mic clip, thus making the microphone useless. I always make sure I've got at least a couple of these available for gigs or recording sessions. They're also made by K&M so you know that they are going to be quality and that they are going to last.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K&M 216 Thread Adapter

704 Customer ratings

You have to be logged in to rate products.

226 Reviews

Served with love!

K&M 216 Thread Adapter

704 Customer ratings

You have to be logged in to rate products.

226 Reviews