Customer reviews about K&M 24116

PA

A pole mount for a subwoofer done properly!

Peter A. 333 19.03.2014

Bought this as an upgrade for a pair of singe 15 subs that had the usual 35mm pole socket in. The problem with the traditional 35mm mount is that it's either just too wobbly that the pole and top box sit at a angle, or they're so tight that they get jammed in.

This solves the problem. A sturdy diecasting into which you screw a proper 20mm threaded speaker pole. Perfectly strong and exactly upright.

Had to make sure that plate was very secure, by adding an additional 150mm square piece of plywood inside the sub cabinet.

Very well made and has a tough powder coast finish that has not marked with extensive use.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

I

Great quality casting.

Ian2612 17.03.2018

I wanted to mount an m20 thread pole onto my deck stand shelf, the good quality and slim depth of these were perfect to fit into the 18mm thick bird.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

J

Good quality product

J-Ron 04.04.2019

The tread is a bit narrow at the end. I First thouhgt that my speaker pole tread was to long, but it becomes narrower at the end. I've put some machine oil on it to lubricate.
Perfect fit on the Turbosound Subs ( no drilling needed )

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

N

N.J.L. 24.01.2024

Solid accessory for speaker building and why not in existing products. Well built and good looking. No problems.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K

Better than a top hat.

Kevin6046 26.02.2016

These plates are much better in a bass bin than a top hat, they are solid and maintain that the pole is always vertical, you can easily replace top hats with these units.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Brilliant

Anonymous 19.04.2016

The K & M 24116 is a fantastic purchase, possibly the best our band has ever made.
Our old speaker stand just sat into the mount, and the top would often shake, or if people knocked into the bass bin then the top would look like it was going to fall sometimes, also taking the speaker off the stand was awkward sometimes.
With the purchase of this speaker mount we don't need to worry about that any more, everything stays steady and the speakers are easy to take off the pole

0

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Very strong and well made

Steve84 01.06.2013

I added two of these to a pair of speakers, making it possible to add poles on the top to support other speakers. They're good and strong and are very well made. When I screw speaker poles into them, they feel totally secure and stand perfectly upright. Good item at a good price.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

w

Reliable product as you can expect from K&M

www.entirespeakers.com 17.08.2018

We build custom sound systems for pro-audio use, and we used these on our sub-woofer floor cabinets for a live rig. They were coupled with K&M ring lock distance rods and served their purpose well. They handled a weight of about 30 kg without issues.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

R

Caution

Richard900 14.06.2013

These are very well made and do the job but.... I bought a pair to swap over those in Mackie SWA bins as I prefer the M20 threaded fixing to discover the bolt fixings are in a slightly differenet spacing - so they're not a direct replacement!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

KM

M20 Mounting plate

K M Productions 12.05.2023

Needed these to change from a 35mm sub socket to a m20 to Make it easier for me to mount my tops does the trick

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K&M 24116

320 Customer ratings

You have to be logged in to rate products.

94 Reviews

Served with love!

K&M 24116

320 Customer ratings

You have to be logged in to rate products.

94 Reviews