Customer reviews about K&M M5 Rack Nut Pack Set

o

Work fine, but why the slotted head screws?

olieolie 11.03.2020

Bought these for my K&M rack. A little odd that the are a different size than the ones that came with the rack, but that's ok. My question is why these have slotted heads and not Phillips. Installation, which sometimes requires a third hand, would be much easier if I could use my cordless driver.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Excellent Quality Items

Stuart8467 23.09.2014

Buying rack nuts shouldn't be a hassle. They are a staightforward item, & it should be a no-brainer. Not so! I've had issues with other packs (I don't want to mention any names), but no such problems with these. They deliver exactly what you would expect, with the minimum of fuss. Nut cages locate into racks with ease, and do not fall out easily, screws are good quality (decent threads are important!). The only negitave I'd say is that I would have expected some washers (nylon especially), to avoid rack rash on all our lovely outbaord gear. Other than that, highly recommended, and will be re-ordering!

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

ED

Good

Emanuel D 21.09.2020

Nothings special. Just some nuts, but came as described. Thank you!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

J

Didn't see it comming...Disapointed, very!!!

JorgeStudio2 17.06.2021

Why on earth someone would prefer to buy slotted heads and not Phillips. Maybe for one or two machines at at time but not for someone planning a larger issue. Everything must be hand made then. I bought 7 packadges and i am giving this nonsence back. What a waiste of time... I wasn't expecting such a thing from K&M.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Rack Nuts/Bolts

Solitaire 15.08.2020

These are fine but not the same size as other rack nuts and bolts that I have in my stock, so not interchangeable.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

You get what you pay for.

Anonymous 31.01.2016

Plenty of pieces to rack a lot of gear. With K&M, you know they're going to be quality parts. The threads wont break when you do them up tight, and the heads don't round off after a few turns either. It's worth spending extra on these than less on others.
You get what you pay for.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

AS

Artem Shevchenko 04.08.2020

It's the second time I've bought it.

Pros:
+ I managed to mount my 20 kg amp in a rack using only 4 screws at the front.

Cons:
- Easy to damage a screw thread.
- Easy to damage a paint layer.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

P

Perfect

Paulcmusik 12.10.2017

For this price, no complaints

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

e

Good quality

edpibu 20.09.2020

The set is of good quality for the price, but it should be noted that the screw heads are slotted which makes screwing more difficult than it should really be.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

t

Good screws but specs are of an M4 screw (not M5)

tetonica 11.12.2023

These screws are of good quality, similar to the ones shipped with K&M racks stands, but not identical. The original K&M screws are M5 (5mm diameter) but the ones that I received are M4 (4mm diameter) so slightly thinner. Wish these screws were exactly the same as the ones that come with the K&M rack stands.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

K&M M5 Rack Nut Pack Set

187 Customer ratings

You have to be logged in to rate products.

5 Reviews

Served with love!

K&M M5 Rack Nut Pack Set

187 Customer ratings

You have to be logged in to rate products.

5 Reviews