To the page content

22.11 - 02.12

cyberweek-deal

MXR DC Brick M 237

150 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

4 Reviews

MXR DC Brick M 237
1.390 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
m
Does Job, One Caveat
motty 01.02.2018
Great device, powers my pedals, doesn't catch fire etc.

One caveat - I'd hoped it would come with a UK power adaptor. It did not. It came with an EU power adaptor, which is alarmingly wobbly when plugged into an EU->UK power adaptor-adaptor device. Being as the power adaptor needs to be 18V / 2A / center-positive, it is almost completely impossible to fix this problem with a proper UK adaptor. I have contacted both MXR and Thomann on this subject to no avail. If you can find such a device with a UK plug, please let me know, because I can't. The only solution I can think of is to leave the UK and move elsewhere in Europe.

Not that this is a bad solution as such and indeed - especially post-Brexit - it has a great deal going for it in many ways, but even if I do emigrate I'll still want to tour the UK from time to time, in which case the dreaded wobble will be back.

Hence four not five stars.
quality
12
0
Report

Report

MS
Good, but overpriced PSU
Matthew Szyłak 08.01.2019
This brick does its job perfectly. The isolated outputs do a hell of a job, no hum whatsoever. The 18v output is there, but I never really had the opportunity to use it. The quality of the build is really good as well (would expect that from brands like mxr) and the PSU is very small which helps out with space management on the pedal board. The only thing about it is the price. 118 is quite a lot, especially that you can get other PSU's of the same quality for a lower price. Overall a good PSU.
quality
1
0
Report

Report

K
Compact and powerful!
Kyuuga 06.11.2019
I was on the market for a power supplier for my pedalboard but I wanted something small that could still pack a punch.

I currently use my pedalboard with 7 pedals and the MXR Brick powers them up perfectly! Haven't noticed any issues with it.

It's so small that it fits on any corner of your pedalboard (or below it) so you don't need to worry about not having space for your multitude of pedals.

It's a little bit pricey but quality is always a tad expensive.

All in all a great purchase, recommended!
quality
0
0
Report

Report

A
Good power supply
Alexi89 28.04.2014
I really like this power supply. It can fit up to 10 pedals, but more importantly, you have the option of powering two pedals with 18V - very useful for those with Fulltone pedals like the OCD that can be powered with both 9v and 18v.

I rated it with 4 stars, not 5, because it is not completely silent, however, for a power supply that isn't isolated, the sound is very good quality in my opinion i.e. not much noticeable hum, and I've gigged with this at loud volumes.

It fits nicely onto a pedal board.

The only drawback is that it came with the European plug and not the three-pinned plug used in the UK so I need an adaptor. Luckily I had one so this is no big deal for me, just an extra thing for me to remember every time I go to jam with my band or play live.

I recommend this, it has made life very easy and I am very happy with how quiet it is.
quality
2
0
Report

Report

M
My first chineese mxr
MrFO 04.03.2018
For this price is better to buy Yankee. Mxr has magic sign 'made in China', and it looks like. Low weight, not so solid as mxr used to be. Cables are low end. If you put it close to amp, you will hear dc distortion. Maybe it's good for pedalboard, when you don't move effects from side to side. Till now I haven't use pedalboard, but now it will be the must, cause cables won't last forever, i think it won't last for months. In sum, I am a bit dissapointed with my first chineese mxr.
quality
0
0
Report

Report

G
Well built
Glenn007 28.01.2021
Good unit. Does what it says and is well built. Only downside it that it only has 9v outputs. Would have been good to have a 12v or 18v available.
quality
0
1
Report

Report

M
Best quality
Mathiew 15.08.2021
No fuzzes, wierd sounds and great package.
Everything You wish from this kind of product.
quality
0
0
Report

Report

B
Great Power Adapter
BillK 18.04.2017
I have been using the DC Brick for quite some time on a nano+ pedaltrain (I have used the velcro material provided in the pedaltrain package and managed to attach it on the bottom without any issues).
The build quality of this product is excellent! Just by holding the brick, you can see the solid build and after having it run for almost a week powering 8 pedals without even getting warm, reassures you for a long lasting product.
In my current setup, I am powering four pedals: Polytune 2, Spectracomp, MXR M80 and a Boss DD500.
Until now, I am very happy with the performance of the PS. Quiet, runs very cool and looks that it can handle a lot more pedals without any issue.
quality
0
0
Report

Report

G
good value power brickq
GUYBENNETT 09.04.2019
basic but works fine , no problems so far
i use this for my second / backup small pedal board - a nano , and managed to fit this underneath so thats the main reason for purchasing it. no problems so far , works fine
quality
0
0
Report

Report

I
Small in size, feels solid
Infestissumam 10.09.2014
This little power-supply was exactly was I was looking for.
The construction feels very solid and no noise.
Small enough to fit on the underside of my pretty small pedalboard(six pedals).
It would have been nice if there had been some kind of "ear" or threaded hole to use when attaching it to the pedalboard(minor problem tough)
quality
0
0
Report

Report

MXR DC Brick M 237