Customer reviews about Neutrik MFD

k

Neutrik makes good stuff

kxszander 05.02.2020

I bought about 20 of these when I decided to make my own patchbays both for live rig and for my studio setup.

Does precisely what it needs to do; use M3 rack screws to fit a 19"-rack backplate with the powercon or XLR-plugs of your choice, fit with optional multicolor Neutrik labeling sheets, and color-coordinate those with optional coding rings for your Neutrik plugs. Pristine rigs for the win!

These are a bit pricy for what it is – and for my personal taste. Color labels, coding rings, adapters set me quite a bit of money. But I don't think there is an equally effective alternative out there, so this is THE way to go.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

B

A time saver.

Breelo 09.09.2015

Having built numerous XLR patch bays, I would recommend anyone building one with the Neutrik feed-through connectors to buy some of these, as they are by far the easiest way to secure the connectors to the panel. They save a lot of time and frustration by not having to use fiddly nuts on the back of the panel. Just make sure you buy enough of them.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Something small but nessecary

Anonymous 08.12.2015

I never knew I even needed these until it came to designing a back panel for a rack unit. The holes have m3 threads on them, and are a lot easier to use than fiddling about with M3 nuts.

If you're creating a d-type rack panel, these are a must!

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

d

A great help

daTroll 08.03.2021

Don’t by a d-norm socket without getting also this. No more fiddling with nuts. Just screw in your M3 bolts and you’re done. Only thing: buy one or two more than you need, just in case you strip a thread..

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

T

Why use anything else?

Terrains 11.07.2024

I read reviews saying this beats fiddling around with M3 nuts at the back of your rack. I did initially think "how hard could that be?" but fortunately I'll never know because I bought these and it's a breeze to fit any D type stuff to rack panels. No need to go nuts ;-)

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

R

Makes life a lot easier!

Renoized 02.08.2020

After struggling to fit nuts on the other side of the rack panel manually I have to say this little piece of kit is very handy if you plan to modify things often!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

TS

Perfect

ToneArt Sound 06.12.2019

Does the job!
One comment: when putting a couple of them right next to each other on a 16-holes rack they touch and bend a little. But the thing still holds perfectly fine

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

JM

So fast!

J McM 05.09.2024

These make making racks so easy and fast. No nuts required which is great because often it's very fiddly to try and hold the nut in when trying to get the screw in as it's already in a rack/rack plate

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

SC

I you need then, buy them.

Simon Cox 15.04.2019

They are good quality M3 threaded fixings for non-threaded XLR/Speakon/Powercon and other Chassis mount D-type connectors.

They clip onto the back of the connector, which makes them easy to mount because you don't have to hold them.

If you need them, why look else where? They are a fair price and they provide anti-rotation mounting for anything you put in it.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

L

Very usefull

Letmelfy 28.03.2020

Highly recommended to help mounting panels

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Neutrik MFD

433 Customer ratings

You have to be logged in to rate products.

193 Reviews

Served with love!

Neutrik MFD

433 Customer ratings

You have to be logged in to rate products.

193 Reviews