Neutrik NP2 RX-B

When one of our bands leads goes wrong, I typically find that the problem is with the plug: either zero or poor quality strain relief for the cable, which permits constant flexing of the wires, so that in the end the wires break through fatigue. Often strain relief consists soley of relatively soft metal 'jaws' being crimped onto the cable. The soldering itself very rarely fails (though it will in the long run if the cable is repeatedly exposed to big temperature changes). I repair all cables these days using Neutrik plugs. Each plug comes with plastic inserts which effectively 'lock' the cable into the plug, and to which the outer shell casing screws. I don't even need to file the metal of the plug contacts to get a good solder joint anymore! Get some of these and look forward to not touching that lead again ...

As a musician who is constantly on the go, I am always in need of reliable and easy-to-use audio connectors. The Neutrik NP2 RX-B has quickly become my go-to choice for connecting my instruments and audio equipment. Here is my detailed review of the Neutrik, including the pros and cons and my experience with the assembly and disassembly process.

High-quality construction is built to last, with a robust and durable metal construction that can withstand the wear and tear of frequent use. The connector feels solid and reliable, and the contacts are gold-plated for maximum signal transfer and corrosion resistance.

Easy assembly and disassembly is very easy to assemble and disassemble, thanks to the simple and intuitive design. The connector can be quickly and easily opened up, allowing for easy access to the contacts and easy cleaning or maintenance if needed.
Versatile compatibility: The NP2 RX-B is compatible with a wide range of audio equipment and devices, making it a very versatile connector for musicians and audio professionals.

Slightly more expensive than some other connectors on the market: RX-B is a bit more expensive than some other audio connectors on the market, which may not be feasible for some budget-conscious users.
Overall, I have been extremely impressed with the Neutrik NP2 RX-B connector. It is a high-quality and reliable audio connector that offers excellent sound quality and ease of use.

The assembly and disassembly process is also very simple and easy to perform, making it a great choice for musicians who need to quickly set up and take down their equipment. While it may be a bit pricier than some other options on the market, the superior build quality and reliability make it well worth the investment.

Neutrik has always been the standard in the world of jack plugs and this model is nothing other that my main guitar cable jack. I have a straight version going in the amp and this, right-angled version going in my guitar. It is well built, soldering can be a bit tricky if you are a beginner (as was I) but with a little patience it can be done easily - I used Cordial cables and what can I say, it plays like a charm.

One thing to be aware of is the rubber cap on the cable end has a limit to what size cables it can take, so no fat cables here (max approx. 7,5mm) and also because you would have issues closing the housing (it has an inner sleeve which surrounds the cable and fixes it in place and it could get tight).

- pros: well built, simple to use, sturdy
- cons: if you are not used to soldering it could take some time before you get it right (15-20 min for a beginner)