StudioRTA Producer Station

After searching online for weeks and comparing many, MANY different offerings, I decided to go for this workstation because it seemed to have everything I needed:
- Wheels, so I can move it around and reach the cables behind it more easily for maintenance etc.
- Solid looking build
- Platform on the bottom that allows me to put my desktop PC, UPS, and subwoofer there
- Sufficient amount of rack space and useful distribution
- Keyboard drawer, so I can have my MIDI keyboard on top and my PC keyboard in the drawer - everything ready when I need it
- The additional top surface consists of a single section - my studio monitors have their own stands, and I prefer having a 'middle section' to put my screens on, as opposed to 'left and right sections' intended for putting studio monitors on
- Affordability
- CD racks for all of the CD's I bought last century! (just kidding, I left those things out to increase my usable surface area, which does not seem to affect structural integrity)

Came very well packed (you can build your own village out of all the cardboard). Build feels solid. I finally have all the space I needed and every centimeter is useful. Due to the added weight of all my gear, it doesn't roll away by itself (I'm not even using the brakes), which is good. But it will still roll if I push it hard enough, which was my original requirement.

As for the downside: The top spaces in all 3 rack areas don't seem to fit any of my 19" hardware, so I have to leave it empty, causing a gap and reducing the amount of usable rack space.
This is not a major problem for me, since I never intended on filling them up completely anyway, and from my seat I can't see the gaps. In fact, the gap in the top rack has a nice side-effect; it allows me to clearly see all buttons and lights on my 1U recording interface, which has been relocated into the second-to-top rack slot due to the top one not fitting.

I did struggle with another 1U item as well. Though I did get it into the rack almost where I wanted it, I had to leave out the top screws because the hole was misaligned. Not 100% sure if that's due to the rack in this desk or the sizing of that 19" unit, but it had been in another rack before without issues. To put this in perspective though, the other 19" equipment I put in the rack (5 items varying from 1U to 3U) fit just fine.

In the end, I'm extremely happy with this workstation. I have a mix of rack gear and other stuff, and I got all of it in there in the way I wanted. However, if you intend to fill up every single rack slot, you'll probably be disappointed (unless you're good at DYI and figure out some alternative solution).

I researched extremely thoroughly before spending what I consider to be a lot of money and I opted for this product from a list of many. However other products on the list were all more expensive and often not as suitable.

Construction took only a couple of hours in a cramped space that is my home studio. Assembly was easy if you're familiar with flat packed goods or basic home DIY. Once assembled a little tweeking had it tight and solid (before it wobbled a bit but just tighten the main bolts from the legs up into the underside of the main work surface and you're grand).

I have room on the top shelf for a 32" monitor, 2X Adam A5Xs and my Macbook Pro 15" open to work as a 2nd monitor. The main surface area is plenty big enough for my 61 key Novation SL mkii, lacie hard drive and turntable with my computer keyboard and mouse on the pull-out drawer under. My soundcard sits on the upper pull-out drawer. I purchased 5 Thon Rack Adapter 1U 25 shelves which are useful for various books, CDs, Microphones and bits and bobs (i don't have any hardware unfortunately) and my vinyl sits under these shelves.

To summarize, it is a compact serious desk that, at this price, is unrivaled. I had no issues with assembly and probably would have paid more, now that I have first hand experience of the quality.

Honestly, I have been wanting this desk for 5 or 6 years, since I first saw it on Thomann's website! And last year (2020), I finally decided to order one - the best decision I ever made (for buying furniture, haha)!

Build quality - absolutely ideal. From the powder-coated steel frames, to the integrated mounting points inside the woodgrain surfaces - it holds a tremendous amount of weight. I have so much equipment sitting on top of it, it's ridiculous:
- 2x Behringer B2030P passive 6.5" monitors;
- 2x Alpine SBE-1044BR passive 10" subwoofers (one on each side of the bottom surface);
- Dual Monitor Stand (mounted on the very top shelf's backside, sitting rock-solid);
- 3x Behringer A800 studio amplifiers;
- 2x 1U rack units of studio electronic equipment (DBX PA2 + Samson PowerBrite Pro10);
- External 4-slot HardDrive enclosure;
- Laptop stand + laptop on top of it + a ton of various cables, studio lights and more...

The rolling castors are absolutely solid and even under that weight, the desk can roll freely (although I do have to push hard, due to my floor having an office carpet, haha).

No cracks, no creaks - this thing moves under its own weight and has the capacity to hold ALL my necessary equipment, thus saving a ton of space in my studio room for other things! And for this price - you CANNOT find anything even remotely comparable to this desk! Absolutely no contest, I recommend this desk!

I needed a new studio desk because we extended the main studio by about 50% and saw this one among the many others on offer.

The fact is, that the cost related to this desk and considering other products (some in the thousands) the StudioRTA Producer was really heads and shoulders above others. While we did NOT use the top speaker shelf (that was a bit 'flimsy' with real speakers on there) the main unit is very useful.

One more issue easily fixed is the fitting of the casters... USE BOLTS and fit them through the base plate/wood. Otherwise they are not quite up to handling the weights that can be imposed through outboard gear and heavy mixing desks.

Overall I don't regret this for one moment and there is no doubt that this desk for its limited cost is one of the ones to beat - but my guess is that you would pay substantially more for something better.

If you're on a budget - then look really close at this unit. It comes flat packed and delivery is included in the price (which is a feat in itself).

Recommended.

Overall a good table and sturdy too - I'm not sure what load limits it has but it can hold record players, rack units, monitors, a Moog and more without even feeling under strain. Very simple to put together too (can be done alone if no one is able to help you), however a second person will be needed to transport the box to the room you wish to assemble it in.

My only issues with the table are as follows:
1. With a 27" iMac sitting on the top section, the screen sits a little too high for my personal preference, and the height of the office chair is limited by the clearance underneath the keyboard shelf below.
2. The rack mounting points are all tucked away under the edges of the table surface, so when sitting down or even standing, the top 2 or 3U of rack space isn't visible - I would have preferred the rack mounts to be flush with the edges of the table.
3. The CD holders seem outdated to me - I feel there could be something more interesting put here such as small drawers for keeping loose patch cables or something.

Great table for organisation and setup, i have 3 synthesizers, a huge keyboard with 8 octaves and 2 monitors set up as well as a mixer and several modules in place. all products fit seamlessly and there is enough space for my laptop as well, i was skeptical of this at first when i purchased the producer station table, however due to the facilitation of space and access points that the table provides for placement and cable management it was easy to move things around and put them in places that would be ideal or be the most organised or access friendly positions.

Setup was quite time consuming and i had to do this with one extra person as there were a lot of pieces, this was very daunting at first but the instructions were very straightforward and easy to understand, after some planning and using a few general tools we were easily able too assemble the table within 3/4 hours of work - well worth the time and effort put in. the setup of the rest of my studio equipment took another hour. now i literally get home and switch on everything without a worry.

I think this table is honestly a perfect purchase in terms of organisation and planning for producers - great buy highly recommend!

This was one of the most organised flat packs i've ever bought. Each part was clearly labeled, every screw was in a packet and labeled, and the instructions were awesome. The hardest part of constructing it was unpacking everything and clearing up the massive amounts of cardboard. There was certainly no chance of damage during transit.

I've seen other people complain that the racks don't align properly, i have installed a 2u drawer on each side, and a 1 u soundcard at the top and have had no issues so far.

The desk is really high quality, and has lots of space for all of my equipment. I wish the top shelf was as wide as the bottom so that i could fit 2 monitors and my 2 speakers without having to tilt the monitors, but otherwise i really love this desk and am very happy with my purchase.