Customer reviews about Voodoo Lab Current Doubler Adapter PPAP

R

Great product

Rain214 27.08.2019

I use this to power up my Line6 HX Stomp so that I don't have to use the PSU adapter that came with the Stomp.
I thought that it will create a little noise or hiss on my signal chain but it doesn't, of course it also helps if the Power supply is isolated and have enough current per slot.

Value for money and the build quality is really good.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

t

Perfect for HX Stomp

tommyj 17.11.2020

This adaptor helped consolidate my pedalboard. I used this to power a HX Stomp from a Strymon Ojai. Perfect.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

A very useful adapter

Alex_93 09.12.2021

It works great with my TC Electronic Plethora X5 connected to the Truetone CS7 power supply. It is a quality product and a must have "tool".

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

BT

This just works well

Bob Thorpe 22.12.2022

This current adapter from Voodoo Labs works perfectly to power my current hungry digital effects. I use it to bridge two 450mA 9v outputs from my Powerplant supply. No noise, and reliable performance from a brand I really trust when it comes to pedalboard power.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

P

Current doubler

PhilM 27.01.2015

I use two of these adapters very handy. You need to know how much Ma the pedal needs.

I use the following outputs on my voodoo labs pedal power: output 5/6 with Current Doubler Adapter to combined to power Tc Electronics flashback (300Ma needed)
Output 7/8 combined using the Current Doubler Adapter to power Palmer amp switcher (130 Ma needed)
The cable clips onto the other cable or outlet of my pedal power securely, so no danger of it falling out. I haven't had any problems using them. I would recommend them but do sus out how much Ma you will need, usually written on pedal or in their manual. I contacted voodoo labs for advice and they were very helpful and fast to respond. Would be cool if they did them in different colours so you could easily see which outlet of your power supply it was in. I recommend this cable.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

D

For huge consuming pedals

Draghiem 17.06.2020

Hi there,

I bough this cause most of the power alimentation output can deliver max 500 mA (or even less)

So, this gear allows me now to power pedals that requiers more than one of the outpul of my alimentation can provide

Handy solution to not having a dedicated alim for those kind of pedals

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

P

Works great

Palladio 26.05.2021

Great solution for those massive pedals that put your power brick to the test. Works like a charm! Do not mistake this cable for the voltage doubler though, or you'll be in trouble! :)

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

CN

A1 so far.

Cathal N 22.10.2020

Use it to double two 500mA outputs to power my EQ which requires 9v 1000mA. Never had a problem.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

T

HXFX - Fender Engine Room - Thumbs Up

TrevorM 13.12.2022

After much faffing around I figured out I needed one of these to power my Line 6 HXFX with my Fender Engine Room. The wall wart on the HXFX is rated at 3A but after researching a bit I learned that the HXFX is drawing about 1.1Amp and people were having varying degrees of success with their various power blocks(Cioks 7 appears to be a winner as well as Enginer Room). The Engine Room outputs are rated at 500mA and combined apppear to hit the magic 1.1 GIGAWATTS (1.1 Amp ;-) ) of Electricity to power the flux capacity, suffice to say ... this did the job.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

y

undoubted quality

ylmzmert 07.05.2020

rock solid voodoo lab product!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Voodoo Lab Current Doubler Adapter PPAP

213 Customer ratings

You have to be logged in to rate products.

85 Reviews

Served with love!

Voodoo Lab Current Doubler Adapter PPAP

213 Customer ratings

You have to be logged in to rate products.

85 Reviews