ABM 1510n Set ABR Nut

Start 360°

Nut Set

With 6 pieces
Milled from full bell brass
Strong root and a lot of sustain
Bore: 4/40 "
Compatible with the Gibson ABR1
Material: brass
Colour: Nickel

30-Day Money-Back Guarantee

Available since May 2012

Item number 283772

Sales Unit 1 piece(s)

Unmachined No

283 kr

Including VAT; Excluding kr200 shipping

113

Sales Rank

in Guitar/Bass Saddles & Nuts

13 Customer ratings

5 11 Customers 4 2 Customers 3 0 Customers 2 0 Customers 1 0 Customers

4.8 / 5

quality

Review guidelines

8 Reviews

The brilliance I hoped for

Benjamin I. 27.07.2014

These are for Gibson guitars; to put them on my Epiphone I had to adapt them. You must enlarge the hole at 3mm (pre-drill at 2.5mm, tap at 3mm, if you don't have the tools and the know-how, don't try).

Then file the lttle studs on the sides, or the saddle won't settle down at the right depth in the bridge. That's a little tedious, but brass is easy to work with files.

Once they are in, the difference in brilliance and attack is obvious, I didn't recognize the tone of my SG at first. You must also file a narrow slot where the string touches the saddle, or the string will break after many bends, because it rests on a sharp angle.

Aside from these delicates chores, the saddles are very good in tone. I wish Epiphone would make brass saddles that are compatible with Epiphone bridges, so you could simply drop them in to replace the so-so zinc saddles.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Great replacement or upgrade

Jonathan4402 06.09.2015

Bought these to replace the saddles on a cheapo no name bridge. You can really tell the difference, adds alot of clarity and sustain due to the high quality materials. Definitely worth the money over cheapo brands

Report

Show translation

Show original

Unfortunately there was an error. Please try again later.

ABM 1510N Replacement für ABR-Saitenreiter.

Karsten P. 15.08.2014

Super verarbeitet. Äußerst präzise. ABM hebt sich qualitativ deutlich von den meisten Mitbewerbern ab. Wünschenswert wäre es allerdings, wenn die Kerbung werksseitig getätigt werden würde. Nur die wenigsten haben hierfür die richtigen Feilen, die zudem noch recht teuer sind. Das Polieren der Kerbe ist sicherlich auch nicht jedermanns Sache.