Adam Hall 5635 Humfrees M6

311

Start 360°

Rack Insulation Against Ground Loops

When rack mounting, additional conducting ground connections are created between 19" devices via the metal rails - the most frequent cause of hum noise.

Humfrees interrupts these ground loops. Devices are attached to the rack rails while electrically separated from each other. Additional plus: The front panels of the devices are protected against assembly damage.

4 M6 screws
4 Insulators
4 Spacers

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since November 1999

Item number 128225

Sales Unit 1 piece(s)

Type Set

Thread Size M6

Length 16

Amount 4

Note Rack Isolation

45 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Rack Screws

This is what customers who viewed this product bought

Adam Hall 5410BLK Rack Screw Pack

45 kr

15%

bought

Adam Hall 5621 Plain Nylon

24,90 kr

bought

Adam Hall 5620 Plastic Washer Pack

35 kr

bought

Adam Hall 5417BLK Rack Screw Pack

38 kr

311 Customer ratings

5 148 Customers 4 92 Customers 3 39 Customers 2 15 Customers 1 17 Customers

4.1 / 5

quality

Review guidelines

137 Reviews

bad product

ColmO 18.03.2014

its only true purpose is to prevent against rack rash, it does not isolate equipment from each other, rather it isolates the rack equipment from the rack rails, so if 1 unit is causing hum this will transfer along each unit as their faceplates arent isolated

the screws dont fit my adam hall rack or gator case, it comes with a soft adapter for smaller screws

you have to cut the pieces out of their molds which isnt too difficult, but takes some accuracy to get them looking smooth with no bits sticking out.

the rubber/plastic warps/goes out of shape and shift position before you have the screws tightened, its difficult to gauge when its tight enough, when it feels tight your left with a misshapen piece

I dont normally right reviews straight after using a product but was so let down by these that I felt the need to write a review. some old bicycle inner tube would work better, or 2 plastic washers per screw would achieve the same

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Your rack deserves the best!

SpyX 14.06.2018

Your rack deserves the best.
If you are a pro you don't need my advice, you know what you'll do. But for the rest of us who build a rack I'll tell you that, this set is a must for your rack.
You have spend a lot of money to buy audio hardware devices, you want the best for your sound so the last thing you want is hum from ground loops created between 19" devices via the metal rails.
Here comes the "Adam Hall 5635 Humfrees M6".
Consists of (4) M6 screws, (4) Insulators and (4) Spacers this is a set for one device. In a very good quality it'll give insulation to your rack against ground loops and protection to the front panels of your devices against assembly damage. Also looks nice aesthetically.
Coming in a good price, don't even thinking to don't make this buying.

Report

Quite good

svenoxtoby 11.05.2017

I have used these in many racks with both M5 and M6 screws. These ARE compatible with both M5 and M6 screws because adaptors are provided for M5 screws.

As noted by another reviewer the can get mis-shapen if you are not careful, but this has only been a cosmetic problem for me.

As for isolation, they have worked every time for me (tested). I have not had trouble keeping the faceplates isolated. Important: when testing for isolation/continuity, remember to unplug all of the power cables from power distribution unit to rack devices. Otherwise the meter will indicate continuity, since the devices are joined through the PE/ECC conductor of each piece of gear (and this is how it must be for safety - NEVER cut a ground/PE/ECC conductor.

Report

Product is fine but a few quality issues

MrMesh 21.03.2019

I bought about a dozen of these to try and help deal with hum issues from my rack gear. For the most part they are effective, but at times the installation is troublesome and the the plastic that wraps around the rack ears is prone to breaking. In addition, the heat shrink around the screws can either come loose or isn't secured properly to the screw, so a heat gun is required in the event anyone has similar issues.

Report

Read all reviews

Adam Hall 5635 Humfrees M6

Rack Insulation Against Ground Loops

This is what customers who viewed this product bought

311 Customer ratings

You have to be logged in to rate products.

137 Reviews

Smart Navigator

Served with love!

Adam Hall 5635 Humfrees M6

Rack Insulation Against Ground Loops

This is what customers who viewed this product bought

Accessories & matching items

311 Customer ratings

You have to be logged in to rate products.

137 Reviews

Compare options

Smart Navigator