To the page content
compare-box

Allparts EP-0285-000 250k Push/Pull Pot

35

Audio Taper Push/Pull Potentiometer

  • Logarithmic 250 kΩ potentiometer
  • Push/Pull switching function
  • Knurled shaft with standard length
  • Thread height: 9 mm
  • Thread diameter: 9.4 mm
Available since June 2016
Item number 388510
Sales Unit 1 piece(s)
Design Audio Taper
Resistance Value 250 kOhms
Characteristic Curve Logarithmic
Thread Length in mm 10,0 mm
Tandem Poti No
Push/Push Push/Pull
Solderless No
shaft type grooved
141 kr
Including VAT; Excluding kr200 shipping
In stock
1
Need help?
Contact
Contact
Contact

35 Customer ratings

4.3 / 5
Rate now

quality

19 Reviews

S
Good pot
StephanPK 21.01.2022
Relative small, so a bit tricky to solder, but on the other hand, does not take a lot of space inside the cavity of the guitar.
quality
0
0
Report

Report

D
Well made but hard to use.
DrKevGuitar 18.01.2018
Build quality is perfectly fine. The threaded shaft is too long for mounting on pickguards without using 3 mm of washers to shim it down. Once installed, the pot works great.

The switch doesn't feel stiff but I have difficulty pulling it up with a plastic strat-style knob; I have to slide my finger nail under the edge of the knob to get enough grip. On stage? Forget it! Perhaps with a tele-style knurled metal knob it'll be easier, but that's not what I want on my guitar.
Build quality is perfectly fine. The threaded shaft is too long for mounting on pickguards without using 3 mm of washers to shim it down. Once installed, the pot works great.

The switch doesn't feel stiff but I have difficulty pulling it up with a plastic strat-style knob; I have to slide my finger nail under the edge of the knob to get enough grip. On
Build quality is perfectly fine. The threaded shaft is too long for mounting on pickguards without using 3 mm of washers to shim it down. Once installed, the pot works great.

The switch doesn't feel stiff but I have difficulty pulling it up with a plastic strat-style knob; I have to slide my finger nail under the edge of the knob to get enough grip. On stage? Forget it! Perhaps with a tele-style knurled metal knob it'll be easier, but that's not what I want on my guitar.
quality
0
0
Report

Report

E4
Ean 45c 21.02.2021
Great for the price. Nice and smooth operation
quality
0
0
Report

Report

-
-Benni- 25.08.2023
I bought this pot new and it arrived with a scratchy action and the push-pull operation is stiffer than the 500k pots that I purchased from Allparts.

Something that is annoying is that this potentiometer only comes with 1 nut, so you cannot height adjust like you can with many other pots. This feels like a miserly cost saving. It would also be great if the grounding tab had a hole through it, to allow a more secure soldering point for ground wires.
I bought this pot new and it arrived with a scratchy action and the push-pull operation is stiffer than the 500k pots that I purchased from Allparts.

Something that is annoying is that this potentiometer only comes with 1 nut, so you cannot height adjust like you can with many other pots. This feels like a miserly cost saving. It would also be great if the
I bought this pot new and it arrived with a scratchy action and the push-pull operation is stiffer than the 500k pots that I purchased from Allparts.

Something that is annoying is that this potentiometer only comes with 1 nut, so you cannot height adjust like you can with many other pots. This feels like a miserly cost saving. It would also be great if the grounding tab had a hole through it, to allow a more secure soldering point for ground wires.
quality
0
0
Report

Report