Clearsonic IsoPac E Dark Grey

Bundle offer comprising

Clearsonic A2466x6 Drum Shield

6-Segment panel

• For live and studio applications
• Noise and sound shielding of drum kits, amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made out of high quality laser-cut acrylic
• Consists of 6 panels with connectors (Hinges)
• Thickness: 6,35 mm
• Height: 1670 mm
• Width: 600 mm
• Indispensable for volume control on the stage and in the studio for a clean mix
• Weight: Approximately 46 kg

2x Clearsonic S2466x2 Sorber

Two-Section Absorber Panel

• Made of compressed fibreglass and encased in dark gray cloth
• Both panels are joined together with a fabric tape and can be used freestanding
• The panel can also be mounted on the inside of the acrylic ClearSonic shields to reduce the amount of reflected sound, or used as sound absorbers on the walls of a studio, basement, church etc.
• Dimensions per piece: 1670 x 609 x 38 mm
• Colour: Dark grey / Anthracite

Clearsonic ST2466 Sorber - twin pack

Absorber Tiles Panels, Pack of 2

• Made of compressed fibreglass and encased in dark grey cloth
• This Sorber is mainly used as a side lid section for the ClearSonic lid system (LidPac)
• Panels are trapezium-shaped on one side
• Dimensions per piece: 1670 x 609 x 38 mm
• Colour: Dark grey / Anthracite
• Set of 2 pieces

Clearsonic AX2412x6 Extender

Panel Extension

• Panel to extend A2448 and A2466 panels
• Made of high-quality, laser-cut acrylic
• Consisting of 6 panels with hinge and 6 H-channels
• Dimensions per panel (H x W): 300 x 600 mm
• Thickness: 6.35 mm
• Illustrations show the panels partly with protective foil

Clearsonic S2466 Sorber

Absorber Panel

• Made of compressed fibreglass and encased in dark grey cloth
• The Sorber is mainly used as a centre piece for the ClearSonic cover system (LidPac)
• But can also be used as a sound absorber on the walls of a studio, cellar, church, etc.
• Dimensions: 1670 x 609 x 38 mm
• Colour: Dark grey / Anthracite

6x Clearsonic S2224 Sorber 2-pack

Absorber Panel

• Made of compressed fibreglass and encased in dark grey cloth
• The panel can also be mounted on the inside of the acrylic ClearSonic shields
• For reducing the amount of reflected sound, but can also be used as a sound absorber on the walls of a studio, cellar, church, etc.
• With the hook and loop fastener connectors (included), panels can easily be attached to almost any smooth surface
• Dimensions: 609 x 558 x 38 mm
• Colour: Dark grey / Anthracite
• 2 Pieces

Clearsonic Standard Support Bar

Telescopic Rod

• Telescopic rod for supporting cover panels
• Variable length of 1530 mm to 2440 mm

Thomann Clip Ventilator

Clip Fan

• 2-Speed air circulation fan for clipping on
• Suitable for Clearsonic ISO- and MEGA-Pacs
• Diameter: 15 cm
• Low-noise