To the page content
compare-box

Cort B5 Element Open Pore Red

9
Sound samples
Slap
0:00
0:00
  • Slap0:30
  • Soundcheck0:53
  • Fingeredfunk0:29
  • Metal0:30
  • Spice0:23
  • Swing0:32

5-String E-Bass

  • Body: mahogany
  • Top: ash
  • Bolt-on 5-string neck: panga panga / walnut
  • Frettboard: roasted maple
  • Fretboard radius: 400 mm (15.75")
  • Scale length: 864 mm (34")
  • 24 Frets
  • Pickups: 2 Bartolini MK-1 humbuckers
  • Active Bartolini MK-1 preamp with 3-band EQ
  • 1 Volume and 1 balance control
  • Mini switch for active/passive
  • Metalcraft M5 bridge
  • String distance: 18 mm
  • Hipshot Ultralight tuners
  • Black hardware
  • Factory strings: Daddario EXL 170-5 Nickel Wound .045 - .130
  • Finish: open pore
  • Colour: Burgundy Red
Available since June 2021
Item number 513920
Sales Unit 1 piece(s)
Colour Red
Body Mahogany
Neck Panga Panga, Walnut
Fretboard Maple
Frets 24
Scale Longscale
Pickup System HH
Elektronic Aktive, Passive
Incl. Case No
Incl. Gigbag No
7.099 kr
Free shipping incl. VAT
In stock
1

9 Customer ratings

4.4 / 5
Rate now

features

sound

quality

8 Reviews

L
Finishing details are important at all price ranges
Lookaji 04.10.2021
Coming from a loved P-bass, it was well time to get extra tonal range. Playing on this Cort B5 I am feeling like those lucky modern tourist of the outer space: you get affordable trips over the flexible EQ knobs, a fly-by on those 24 frets and a whole new string to pull, bend and tune, with a totally supportive electronics under the hood up to the output jack.
The guitar body is ergonomically shaped and very well modeled, I dont miss the varnish on the paint at all, just love this "Open Pore" grip feeling in my hands. The neck feels just right too!
Negative note is only about a couple little glue spots here and there... but with time they surely might disappear. Finally I thank the Thomann team that shipped it to me very quickly! \m/
Coming from a loved P-bass, it was well time to get extra tonal range. Playing on this Cort B5 I am feeling like those lucky modern tourist of the outer space: you get affordable trips over the flexible EQ knobs, a fly-by on those 24 frets and a whole new string to pull, bend and tune, with a totally supportive electronics under the hood up to the output jack.
The
Coming from a loved P-bass, it was well time to get extra tonal range. Playing on this Cort B5 I am feeling like those lucky modern tourist of the outer space: you get affordable trips over the flexible EQ knobs, a fly-by on those 24 frets and a whole new string to pull, bend and tune, with a totally supportive electronics under the hood up to the output jack.
The guitar body is ergonomically shaped and very well modeled, I dont miss the varnish on the paint at all, just love this "Open Pore" grip feeling in my hands. The neck feels just right too!
Negative note is only about a couple little glue spots here and there... but with time they surely might disappear. Finally I thank the Thomann team that shipped it to me very quickly! \m/
features
sound
quality
4
0
Report

Report

V
Imbattable à ce prix là
Vehala 22.03.2024
Je possède une A4 ultra Ash fantastique et ayant besoin d'une 5 cordes occasionnellement, je me suis de nouveau tourné vers la gamme artisan de Cort.
Et je ne suis pas déçu, pour moins de 600 Euros, la B5 élément est vraiment remarquable.
Les photos ne lui rendent pas honneur, son rouge est plutôt mat et plus foncé qu'en photos et met la texture du bois de la table en valeur.
La touche en érable torréfié, couleur tabac, est splendide et le manche en manga manga et noyer est un régal. Plus large et plus plat que sur la A4, mais malgré tout rapide et confortable.
Les Bartolini mk1 sont bien mordants, et l'équaliseur permets d'obtenir une palette de sons assez variés, idem pour le blond entre les deux micros.
Le son reste très moderne par contre, super pour le rock, métal, doom, funk, etc. Pas forcément adapté pour du jazz ou de la soul. Peut être un peu trop propre pour du stoner aussi. Quoique...
Le chevalet est bon, même si je préfère le hipshot de la A4. Les mécaniques hipshot sont parfaites, comme d'habitude.
Le sustain est remarquable et la corde B ronronne à fond.
Bref autant de features et de qualité à ce prix là, il n'y a aucune concurrence.
Je possède une A4 ultra Ash fantastique et ayant besoin d'une 5 cordes occasionnellement, je me suis de nouveau tourné vers la gamme artisan de Cort.
Et je ne suis pas déçu, pour moins de 600 Euros, la B5 élément est vraiment remarquable.
Les photos ne lui rendent pas honneur, son rouge est plutôt mat et plus foncé qu'en photos et met la texture du bois de la
Je possède une A4 ultra Ash fantastique et ayant besoin d'une 5 cordes occasionnellement, je me suis de nouveau tourné vers la gamme artisan de Cort.
Et je ne suis pas déçu, pour moins de 600 Euros, la B5 élément est vraiment remarquable.
Les photos ne lui rendent pas honneur, son rouge est plutôt mat et plus foncé qu'en photos et met la texture du bois de la table en valeur.
La touche en érable torréfié, couleur tabac, est splendide et le manche en manga manga et noyer est un régal. Plus large et plus plat que sur la A4, mais malgré tout rapide et confortable.
Les Bartolini mk1 sont bien mordants, et l'équaliseur permets d'obtenir une palette de sons assez variés, idem pour le blond entre les deux micros.
Le son reste très moderne par contre, super pour le rock, métal, doom, funk, etc. Pas forcément adapté pour du jazz ou de la soul. Peut être un peu trop propre pour du stoner aussi. Quoique...
Le chevalet est bon, même si je préfère le hipshot de la A4. Les mécaniques hipshot sont parfaites, comme d'habitude.
Le sustain est remarquable et la corde B ronronne à fond.
Bref autant de features et de qualité à ce prix là, il n'y a aucune concurrence.
features
sound
quality
0
0
Report

Report

V
Wonderful bass!!
Vikingvik86 23.02.2024
The bass plays like a dream, and shipping was quick, too!
features
sound
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
v
vokars 26.02.2022
Eigentlich wollte ich den Cort Artisan B5 in natur, weil er 50 EUR günstiger ist und habe mich deshalb brav nach der Thomann Liefer-Prognose (2-3 Wochen) gerichtet und ca. 3 Wochen gewartet. Als er dann lieferbar sein sollte, wurde die Prognose auf 9-12 Wochen aktualisiert. Naja, habe dann den lieferbaren roten für 50 EUR mehr genommen.

Der Bass selber ist bezüglich seines Klangs für den Preis außergewöhnlich. Ich spiele sehr gerne damit und kann ihn daher weiter empfehlen. Kann diesbezüglich mit wesentlich teureren mithalten. Läßt sich schön breit einstellen, was mir für den Mix wichtig war. Schon bei den Rezensionen im weltweiten Netz war mir aufgefallen, daß man Begeisterung raushören kann (zusammen mit dem Artisan B5 Plus / Vorgänger Modell).

Ein ähnliches Modell gibt es übrigens von Ibanez, das wohl auch von Cort gefertigt wird aber ca. 200 EUR teurer ist.

Etwas Arbeit hat die Einstellung gemacht (Hals Krümmung habe ich noch vor mir). Der Steg war bei der Auslieferung nicht eingestellt, so daß am 12.Bund / 1. Oktave ca. 50ct Abweichung (zu tief) auf allen Saiten da waren. Und dann ging es weiter: Bei der g Saite (d Saite grenzwertig) war der Saiten-Reiter am Anschlag. Eine Anfrage bei Thomann ergab, daß das Problem des zu weit entfernten Stegs dort nicht bekannt sei und es sich wohl um einen Einzelfall handle. Ansonsten hätte es Sinn ergeben, Cort zu benachrichtigen.

Da ich lange nach so einem Bass gesucht habe und ihn unbedingt behalten wollte, habe ich mir daher bei ebay für ein paar EUR 30mm lange M3 Linsenkopf Schrauben besorgt, um die 25mm langen M3 Schrauben des Stegs dagegen auszutauschen. Hat funktioniert. Ist jetzt weitgehend bundrein, lediglich vom 20.-24. Bund noch rund 5 ct Abweichung. Damit kann ich leben, weil ich da oben sowieso nicht spiele. Sollte das wider Erwarten mal eines Tages nicht reichen, werde ich mir eigene Saiten-Reiter fräsen. Dieser Bass ist es wert.

Edit: Nachdem Hals-Krümmung und Saiten-Höhe richtig eingestellt wurden, mußte auch die Höhe der Pickups nachgezogen werden. Klingt damit deutlich kräftiger.
Eigentlich wollte ich den Cort Artisan B5 in natur, weil er 50 EUR günstiger ist und habe mich deshalb brav nach der Thomann Liefer-Prognose (2-3 Wochen) gerichtet und ca. 3 Wochen gewartet. Als er dann lieferbar sein sollte, wurde die Prognose auf 9-12 Wochen aktualisiert. Naja, habe dann den lieferbaren roten für 50 EUR mehr genommen.

Der Bass selber ist
Eigentlich wollte ich den Cort Artisan B5 in natur, weil er 50 EUR günstiger ist und habe mich deshalb brav nach der Thomann Liefer-Prognose (2-3 Wochen) gerichtet und ca. 3 Wochen gewartet. Als er dann lieferbar sein sollte, wurde die Prognose auf 9-12 Wochen aktualisiert. Naja, habe dann den lieferbaren roten für 50 EUR mehr genommen.

Der Bass selber ist bezüglich seines Klangs für den Preis außergewöhnlich. Ich spiele sehr gerne damit und kann ihn daher weiter empfehlen. Kann diesbezüglich mit wesentlich teureren mithalten. Läßt sich schön breit einstellen, was mir für den Mix wichtig war. Schon bei den Rezensionen im weltweiten Netz war mir aufgefallen, daß man Begeisterung raushören kann (zusammen mit dem Artisan B5 Plus / Vorgänger Modell).

Ein ähnliches Modell gibt es übrigens von Ibanez, das wohl auch von Cort gefertigt wird aber ca. 200 EUR teurer ist.

Etwas Arbeit hat die Einstellung gemacht (Hals Krümmung habe ich noch vor mir). Der Steg war bei der Auslieferung nicht eingestellt, so daß am 12.Bund / 1. Oktave ca. 50ct Abweichung (zu tief) auf allen Saiten da waren. Und dann ging es weiter: Bei der g Saite (d Saite grenzwertig) war der Saiten-Reiter am Anschlag. Eine Anfrage bei Thomann ergab, daß das Problem des zu weit entfernten Stegs dort nicht bekannt sei und es sich wohl um einen Einzelfall handle. Ansonsten hätte es Sinn ergeben, Cort zu benachrichtigen.

Da ich lange nach so einem Bass gesucht habe und ihn unbedingt behalten wollte, habe ich mir daher bei ebay für ein paar EUR 30mm lange M3 Linsenkopf Schrauben besorgt, um die 25mm langen M3 Schrauben des Stegs dagegen auszutauschen. Hat funktioniert. Ist jetzt weitgehend bundrein, lediglich vom 20.-24. Bund noch rund 5 ct Abweichung. Damit kann ich leben, weil ich da oben sowieso nicht spiele. Sollte das wider Erwarten mal eines Tages nicht reichen, werde ich mir eigene Saiten-Reiter fräsen. Dieser Bass ist es wert.

Edit: Nachdem Hals-Krümmung und Saiten-Höhe richtig eingestellt wurden, mußte auch die Höhe der Pickups nachgezogen werden. Klingt damit deutlich kräftiger.
I actually wanted the Cort Artisan B5 in natural because it was 50 EUR cheaper, so I dutifully followed the Thomann delivery forecast (2-3 weeks) and waited about 3 weeks. When it was supposed to be available, the forecast was updated to 9-12 weeks. Well, I took the red one that was available for 50 EUR more. The bass itself is exceptional in terms of sound for the price. I really enjoy playing with it and can therefore recommend it. In this respect it can compete with much more expensive ones. Can be adjusted to a nice width, which was important to me for the mix. I noticed from the reviews on the worldwide internet that you could hear enthusiasm (together with the Artisan B5 Plus / previous model). By the way, there is a similar model from Ibanez, which is also made by Cort but is around 200 EUR more expensive. The adjustment took some work (I still have to do the neck curvature). The bridge was not adjusted upon delivery, so that there was a deviation of around 50 ct (too deep) on all strings at the 12th fret / 1st octave. And then it continued: On the g string (borderline d string) the string rider was at the stop. An inquiry to Thomann revealed that the problem of the jetty being too far away was not known there and that it was probably an isolated case. Otherwise it would have made sense to notify Cort. Since I've been looking for a bass like this for a long time and really wanted to keep it, I bought a few EUR 30mm long M3 lens head screws from eBay to replace the 25mm long M3 screws on the bridge. Worked. It is now largely federally clean, only from the 20th to the 24th. The waist still has a deviation of around 5 ct. I can live with that because I don't play up there anyway. If, contrary to expectations, one day that isn't enough, I will mill my own string riders. This bass is worth it. Edit: After the neck curvature and string height were set correctly, the height of the pickups also had to be tightened. It sounds much more powerful.
features
sound
quality
5
0
Report

Report

Did you know?

Guides
Bass Guitars