Customer reviews about DiMarzio EP1201PP

5

5_gadalaiks 03.04.2022

Easy to install and works as it should.
However, I didn’t check the dimensions of this pot, and had to extend mounting hole in the guitar. And you might want to be careful soldering ground wire to the pot. While soldering, I might have damaged the pot and now it can be turned in never ending circle (it still works though)

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

j

Smooth, fast and reliable.

jorgemosquerad 25.06.2021

If you are looking for smooth and fast operation, firm switching, no noise and no loose signal, DiMarzio pots will please you beyond expectations.
I used two on my guitar, a master vol with phase shifting and a tone one with Parallel/series switch. They couldn't work any better, and I consider myself hard to please. I never like anything.
I've had it worst installing other push/pulls in the past, but these DiMarzio were a walk in the park. Although I admit that bigger soldering points would be more confortable.
I will always recommend these pots.
They have nothing to envy CTS or others.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

B

Nice Feel

Briano 04.12.2013

I used this pot for the "push pull" feature. I was able to split my humbuckers to single coil when the knob was pulled out. It worked great. A really nice feel of torque to it when turning the shaft, and firm soft but solid push and pull action. Very durable. NOTE 500k for humbuckers 250k for single coils.

5

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

P

Nothing to complain about

Paramite 03.12.2022

These potentiometer aren't abundant, and this is my first one, so i won't compare it to anything. I haven't done the something either, so I don't know if the design is any bad. What I can say for sure, that this thing works perfectly. Sturdy, no cracking or additional noise. I'm using it for about 4 years and nothing has changed, even though our kids like to fiddling with it as well. If you need a switchable potentiometer, don't look any further.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

AS

Do their job

A Saint 21.07.2023

It's a nice pot. Sounds well wherever I tried it.

It can be a little brittle, though. Be careful when installing.

Also, be aware that the Asia made guitars have smaller holes in them. If you want this pot installed, you must enlarge the hole. Pencil and sandpaper do magic, though (be careful not to chip off finish pieces and use some thin sandpaper; I wouldn't start with anything less than 250).

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

D

Does the job!

Donny 05.06.2013

Bought this to coil split a replacement Dimarzio humbucker (which came with several wiring schemes for split / out of phase etc). Went for the series/parallel option. The switching is noiseless and the volume pot shaft is reasonably stiff - better than my old pot which used to vary on its own.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

j

spotless

johnnygraveyard 11.02.2019

It does exactly what it was supposed to. It has a really quality feel to it.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

h

Really smooth action

hermonassa 19.08.2017

I'm using it as a single/double coil push pull switch on my explorer.

Pros:
Rugged, have had no issues so far. Turning and switching is smooth as butter.

Cons
None

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Brilliant

Anonymous 02.02.2016

I'm really happy with this pot. The taper is nice and steady and has a comfortable torque. Push/pull feels solid and I've had no problems with it.

Be aware that if your guitar currently has import pots you'll probably have to enlarge the holes a little. Easily done with a tapered reamer.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

m

Great quality in every aspect!

metalzone6gr 11.09.2018

Even though it was quite hard soldering on such a small format pot, the result is rewarding. Great control, beautiful tone, combined with DiMarzio pickups (Titan set), clicky push-pull switch and feels sturdy.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

DiMarzio EP1201PP

257 Customer ratings

You have to be logged in to rate products.

7 Reviews

Served with love!

DiMarzio EP1201PP

257 Customer ratings

You have to be logged in to rate products.

7 Reviews