Doepfer A-111-3

Micro Precision VCO / VCLFO

Switchable between LFO and VCO modes
The range of the Tune control can be changed by jumper - position 1: 16 Hz to 20 kHz, position 2: 16 Hz to 70 Hz, without jumper: 16 Hz to 22 Hz
Width: 4 HP
Depth: 65 mm
Power requirements: +40 mA (+12 V) / -40 mA (-12 V)

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since September 2016

Item number 399219

Sales Unit 1 piece(s)

Analog Yes

Digital No

Width 4 TE / HP

variants Doepfer

Show variations of this product

Doepfer A-111-3

Doepfer A-111-3 Micro Precision VCO / VCLFO * Switchable between LFO and VCO modes * The range of the Tune control can b...

2.050 kr

to the product

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

1.277 kr

to the product

132

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

1.135 kr

to the product

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

2.799 kr

to the product

119

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

449 kr

to the product

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

1.535 kr

to the product

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

1.535 kr

to the product

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

1.859 kr

to the product

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

1.277 kr

to the product

Doepfer A-106-5 SEM Filter Special Ed.

Doepfer A-106-5 SEM Filter Special Ed. Filter * 12 dB Multi-mode filter, in which the circuit of the SEM module is used ...

1.149 kr

to the product

Doepfer A-180-3 Dual Buffered Multiple

Doepfer A-180-3 Dual Buffered Multiple Synthesizer module * Double buffered 1-in-3 multiple * For buffering and duplicat...

629 kr

to the product

Doepfer A-190-3

Doepfer A-190-3 USB/MIDI-CV/Gate Interface * Allows the integration of the A-100 module system into a USB or MIDI system...

1.285 kr

to the product

2.050 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Oscillator Modules

11 Customer ratings

5 8 Customers 4 2 Customers 3 1 Customer 2 0 Customers 1 0 Customers

4.6 / 5

handling

features

quality

Review guidelines

9 Reviews

Nightjar 21.05.2019

A great starting vca, and a great tool to more extensive rack due to the LFO as it can crossmod and make a fair few shapes. However it is on the small side so it can get crowded, but that's part of the charm

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

One of the best start VCOs

Jon Mayo 04.03.2024

This tiny little CEM3340 based oscillator is my #1 recommendation for someone looking into getting to Eurorack modular. It has all the key functionality and takes up little HP. And it can be useful to supplement a larger multi-voice patch.

The quality of Doepfer's knobs is perhaps the best in the industry. Their modules, including this one, are deep and won't fit some shallow skiffs. So check the depth!

Features I think are important for a good starter VCO that this VCO has. 1V/Oct tracking over a wide number of octaves (15 octaves according to Doepfer!). Exponential FM input, for 2OP-like FM sounds with another oscillator. Linear frequency modulation for vibrato effects. Soft and hard sync (I use hard sync mostly, so I have the jumper set there).

Or buy 2, and a noise generator (Doepfer A-118-2) and start making your own drum sounds.

Report

It's fine

raindeer 04.08.2020

No nonsense product. I'm using other oscillators so this one is really good for modulating them at all kinds of rates. I can't quite figure out how to get the LFO down to the 0.001Hz (more like 0.05) but it may be possible using an external source.