Doepfer A-162

Start 360°

Dual Trigger Delay

Allows delayed output of the input signal
Power requirement: +40 mA (+ 12V) / -0 mA (-12V)
Width: 8 HP / 40.3 mm
Depth: 45 mm (measured from the back of the front panel)

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since October 2004

Item number 154957

Sales Unit 1 piece(s)

Width 8 TE / HP

Show variations of this product

Doepfer A-162

Doepfer A-162 Dual Trigger Delay * Allows delayed output of the input signal * Power requirement: +40 mA (+ 12V) / -0 mA...

966 kr

to the product

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

1.277 kr

to the product

119

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

449 kr

to the product

132

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

1.135 kr

to the product

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

2.799 kr

to the product

Doepfer A-160-2 Clock Divider II VE

Doepfer A-160-2 Clock Divider II VE Frequency Divider For Clock/Trigger/Gate Signals * Width: 4 TE / HP * Depth: 35 mm *...

1.399 kr

to the product

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

1.015 kr

to the product

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

759 kr

to the product

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

1.535 kr

to the product

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

1.277 kr

to the product

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

1.535 kr

to the product

Doepfer A-101-2 Vactrol Lowpass Gate

Doepfer A-101-2 Vactrol Lowpass Gate Vactrol lowpass gate * Combination of low-pass filter (LP) and VCA * Based on the i...

1.277 kr

to the product

966 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Clock-, Trigger-Modules

25 Customer ratings

5 21 Customers 4 4 Customers 3 0 Customers 2 0 Customers 1 0 Customers

4.8 / 5

handling

features

quality

Review guidelines

15 Reviews

Doepfer support is NON PLUS ULTRA

Vladimir Woelfl 25.08.2021

I modded mine to get really short delays (less than ms), didn't work right at first, but then I got a reply from Dieter Doepfer himself 😁
I did what he wrote me, and now it works exactly as I want it to.

In case anyone else decides to change the timing caps - first note that this *voids warranty*, so if you're not experienced with electronics, don't mess with it.

I used 330nF for C2 and 100nf for C5.
This is what Dieter Doepfer wrote me:

"If the value of capacitor C2 (10u) is reduced too much the first unit (delay) does no longer trigger the second unit because the pulse becomes too short. An additional resistor at the trigger input of the second unit (pin 8 of the NE556) to GND will help to solve this problem (1M should work, we tested it with C2=470nF). In addition the resistor R4 can be increase from 220 Ohm to 1k. R4 defines the shortest time and is in series with the potentiometer."

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

trigger delay with huge range

Anonymous 24.10.2016

A dual module that offers a number of possibilities. I use it to adjust the gate time of a clock signal or to divide down the clock signal (these are both done with just the gate length control). With a logic module interesting rhythms can be created very simply and with asymetrical patterns or swing. I also use it to add delayed vibrato and other modulations to my sounds. The delay can be exceptionally long as can the gate length. And of course the all important LEDs to let you know what the module is doing.

I have only rated the sound as okay as this module doesn't produce or modify sounds itself (although if you put an audio signal through it you get a really crunched up distortion!)

Report

Eindelijk

dhoinjo 18.04.2019

Blij dat ik dit geprobeerd heb. Sommige van mijn sequencers sturen de gate iets te vroeg waardoor het voltage nog niet helemaal stabiel is en resulteert in ongewenste noten. Met deze module is dat verleden tijd. En dat is maar een van de mogelijkheden. Goedkoop bovendien. No brainer!

Report

Good

exmojoao 19.02.2020

It works fine i use it too to convert a longer gate into trigger with delay and length at minimum.

Report

Read all reviews

Doepfer A-162

Dual Trigger Delay

25 Customer ratings

You have to be logged in to rate products.

15 Reviews

Smart Navigator

Served with love!

Doepfer A-162

Dual Trigger Delay

Accessories & matching items

25 Customer ratings

You have to be logged in to rate products.

15 Reviews

Compare options

Smart Navigator