Enttec Pixelator Mini

Ethernet Pixel Converter

• Developed to simplify the control of LED pixel dots and strips
• Converts up to 8,192 channels (2,730 RGB pixels) via its 8 PLink outputs (2 universes per port) with perfect synchronisation
• Acts as the centre of the PLink control system from ENTTEC
• Converts eDMX (e.g. Art-Net, sACN and ESP) to SPI in the PLINK system for pixel control over long distances
• 1 x RJ45 Ethernet input (10/100 Mbit/s) to 8 x RJ45 output ports, each enabling PLINK data output via Cat5e/Cat6 cable
• Up to 32 universes (4 U per port) Pixel control in overdrive mode
• Active IEEE 802.3AF Active PoE or 12-24 V DC power input
• All ports have ESD surge protection and resettable fuses to block external faults and the spread of electrical noise through the control network
• Compatible with the ENTTEC PLINK INJECTOR series
• Compatible with the automatically addressable RGBW LED dimmer ENTTEC CVC4
• The pixel arrangement including pixel sequence and pixel grouping for each PLINK output can be configured individually
• Scope of delivery: Pixelator Mini, 1 x 2 m CAT5 cable, 1 x 12 V power supply adapter with international plugs, rack mounting bracket, surface/DIN mounting bracket, DIN clip and screws

Technical Data:

• Connections: 8 x PLINK output (RJ45)
• 1 x Power input (DC)
• 1 x Ethernet (RJ45)
• ESD protection: resettable fuse and TVS suppression per port
• Surge protection: Yes (all ports)
• IP rating: IP20
• Input protocols: Art.Net, sACN, ESP
• Output protocol: SPI in the PLINK system
• max. output universes: 32
• Network speed: 10/100Base-T
• Network configuration: Static / DHCP
• Configuration and update: Web interface
• Input voltage: 12-24 V DC/PoE IEEE802.3AF
• Max. power consumption: 8 W
• Cooling method: Convection
• Operating temperature: -20°C to +50°C
• Housing material: ABS + anodised aluminium
• Dimensions: 390 x 210 x 110 mm
• Weight: 0.79 g