To the page content

22.11 - 02.12

cyberweek-deal

Rean NYS 322

175

DIN Connector

  • 5-Pin
  • With metal sleeve
  • Maximum cable diameter: 5 mm
  • Made by Rean (registered Trademark of Neutrik AG)
Item number 121360
Sales Unit 1 piece(s)
Build In No
Plug DIN 5-pol. (MIDI) male
20,60 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

175 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

61 Reviews

MM
The only decent MIDI plug I could find
Mike MK 06.04.2020
I'm using these connectors for making my own MIDI cables in my quite specific studio setup.

Pros:
- excellent price to quality ratio
- sturdy with proper strain relief
- metal casing
- easy to solder
- fit well in all MIDI sockets

Cons: none

I've been using these for quite some years now. Some users might find it irrelevant but I like how these plugs slide into all MIDI sockets on all of my devices, while I hade some ready made cables that had to be plugged in and out with decent force.

While not a con, I'd like to see more variants of this connector, e.g. 90 degrees angle, etc.
quality
1
0
Report

Report

A
High quality connector
Anonymous 12.03.2014
I use this one for an old Philcorda which has an 5 pin audio output. I also used cheaper ones but i really prefer this one. First of all the metal case is really stable and solid. Then the cable relief and rubber break protection is also very solid. At least the connection pins inside are very easy to solder. The solder almost sticks to the pins. This is a mess with the cheap ones. Espacially becaus there are five of the pin connectors and they´re very small. So if you want a long live, easy to solder connctor invest the more bucks ans go for the neutrik! I only used it for audioconnections. Don´t know how it works for Midi.
quality
2
0
Report

Report

A
Easy to solder
AdrianoGominho 13.02.2021
Using these to make my own midi cables. These are easy to solder and seem sufficiently robust to withstand frequent handling.

The fitting between the metal case and the plastic core is very tight. On one connector the case was slightly ovalized, not that this could be visible to the naked eye, but enough to prevent the plastic core to slide to its position. A gentle press on the metal opening with a suitable sized drill was enough to sort this out, but if I had not the proper tools I would be stuck with an unusable item.
quality
0
0
Report

Report

P
good
Pjanoz 22.10.2018
Its very nice quality but Ive had some where the rubber protection cracked.
quality
1
0
Report

Report