Sommer Cable Quantum Highflex Multipair 2

203

High Qualiy Multicore Cable

High quality 2-pair multicore
Suitable for live and studio purposes as well as permanent installations
Completely torsion-free
Cold-resistant up to -30°
Pairs of wires insulated individually with rubber sheath
Cu-coil shielded with 99% coverage
Low capacitance of 45 pF cable/cable
110 Ohm (AES/EBU), compliant over hundreds of metres
Cable cross-section: 0.14 mm²
Sheath: S-PVC
AWG - AWG26
Conductor insulation: Skin PE
Shielding: Cu coil, paired
Coverage: 99%
Temperature range: -30° to 70°
Sheath colour: Black, matte
Capacitance cable/cable at 1 m: 45 pF
Capacitance cable/shield at 1 m: 90 pF
Conductor resistance at 1 km: < 90 Ohm
Insulation resistance at 1 km: >1 GOhm
Characteristic impedance: 110 Ohm
Outer diameter: 8.5 mm

Available since December 2006

Item number 108775

Sales Unit 1 metre(s)

Number of NF-channels 2

Screened Pair Yes

Colour Black

33 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Multicore Cable by the Meter

This is what customers who viewed this product bought

Sommer Cable Quantum Highflex Multipair 4

50 kr

bought

Sommer Cable Mistral Multipair MCF04

45 kr

bought

Sommer Cable Quantum Highflex Multipair 8

115 kr

bought

Sommer Cable Mistral Multipair MCF02

31 kr

203 Customer ratings

5 170 Customers 4 26 Customers 3 4 Customers 2 2 Customers 1 1 Customer

4.8 / 5

quality

Review guidelines

76 Reviews

Good multicore - a little overkill with 2 lines

Stephan7664 18.02.2014

This multicore cable is very flexible, has a thick, hard to cut but very soft outer jacket, and nice wires inside. It is, however a little big for a cable carrying two signals, as there are two fibre-fillers each as big as a sub-cable. The 4-pair version of this cable is just as thick. The wires besides the big outer jacket are easily stripped (I use a professional Stripax automatic wirestripper) and soldered.

My use of this cable was to connect a preamp to my DSLR Camera. The cable barely fit into a 5-pin XLR connector with the help of some tools to cut oof parts of the strain-relief inside the connector. I used an Amphenol 5 pin XLR, which is like the Neutrik XX series, but cheaper. For this cable, it was a mistake since the Amphenol's plastic for the strain relief is hard and brittle, and it was easy to break of too much. Neutricks strain relief is softer and not brittle at all, so next time I will spend the extra cash.

Mounting on the other side was using an industrial strain relief. For this cable you should use a trumpet, as the screw0type strain reliefs can create a sharp bend in this cable.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Awesome cable!

Johan SpinOff 28.12.2019

Very good cable for on-stage use! I love to have a couple of 2-pair and 4-pair XLR cables around for feeding in-ear monitors, going from the DI's of the keyboard to the stage block, ... It drastically reduces the amount of separate cables on the stage. It just looks neater, works faster, ...

Pros: Good quality, Easy to solder

Cons (sort off...): It's rather expensive, but totally worth it!

Report

Good for Studio Applications, Maybe not so much for Live Applications

BlackSpire 26.10.2021

I use the cable for custom length stereo audio connections in my studio.
The two cores are extremly well padded and will resist people walking over it pretty well (I still wouldn't recommend running it through a walk way).
While it might be overly thick and a bit expensive, I like buying cables that last for a life time, which this cable does so far.
Thanks to the padding, this cable will also last long in a live setup, but due to its thickness it can get cumbersome to handle at certain lengths.
Also there is something to be said for not using expensive cables in live setups, since event the best cables won't survive an idiot tying a knot in it.

Note: be careful when removing the outermost coating layer as the next layer is the individual core coating, which you don't want to cut open.
The individually coated cores are thick enough to work with the strain releave of neutrik connectors.

Report

muflonski 04.03.2019

This one was a bit of a letdown for me. For a two pair cable composed of really thin individual lines, the cable as a whole is really thick with a lot of filler inside. Coiling is kind of clumsy because of that. Either thinner overall cable diameter or thicker individual strands would feel much better. But it is usable and so far it works as it should.

Report

Read all reviews

Sommer Cable Quantum Highflex Multipair 2

High Qualiy Multicore Cable

This is what customers who viewed this product bought

203 Customer ratings

You have to be logged in to rate products.

76 Reviews

Smart Navigator

Served with love!

Sommer Cable Quantum Highflex Multipair 2

High Qualiy Multicore Cable

This is what customers who viewed this product bought

Accessories & matching items

203 Customer ratings

You have to be logged in to rate products.

76 Reviews

Compare options

Smart Navigator