To the page content
compare-box

Old Blood Noise Endeavors Signal Blender

28

Effects Pedal for Electric Guitar & Bass

  • Offers a range of routing solutions through the use of a pair of send / returns, primary input and output, switcher and volume control
  • Can be used as a parallel effects mixer, 3-to-1 mixer, 1-to-3 splitter, active ABY, as volume control and more
  • Controls: Clean, Loop B Volume, Loop A Volume
  • Pushbuttons: Loop B Phase, Loop A Phase
  • LED: Clean, Loop B, Loop A
  • Footswitch: Clean, Loop B, Loop A
  • Input: 6.3 mm jack
  • Output: 6.3 mm jack
  • Loop A & B send / return: 4x 6.3 mm jack
  • Power supply: Coaxial connector 5.5 x 2.1 mm, negative polarity inside
  • Current consumption: 31 mA
  • Power supply via 9 V DC power supply (not included, suitable power supply: Art.409939)
  • Dimensions (W x D x H): 92 x 117 x 60 mm
  • Weight: 490 g
  • Made in USA

Note: Battery operation is not supported

Available since March 2020
Item number 489728
Sales Unit 1 piece(s)
Effect Types Blender
1.859 kr
Including VAT; Excluding kr200 shipping
In stock
1

28 Customer ratings

4.6 / 5
Rate now

handling

features

sound

quality

16 Reviews

TO
Great piece of kit
Thomas O. 713 25.08.2021
Like this very much but the first one I got became faulty and I had to have it replaced , Thomann to the rescue and no hassle , got a new one in no time. Hopefully this time it will last.
Good: 3 into 1 mix, 1 to 3 mix , 1 to 2 effects parallel blending possible.
i use it for the following 1 guitar send 1 to blackbird pre/dis blended with boss cp1x to Marshal dsl 20 watt return ie. to power amp only and a home made switch to put it into the front end of Marshall as well. and just a clean signal from guitar , all of this goes via 2 notes captor x (16) into my synergy core so basically i get 3 signals with effects and 1 completely gtr only signal clean to the DAW via synergy core . all works very well, blackbird thru the power amp sounds great.
Like this very much but the first one I got became faulty and I had to have it replaced , Thomann to the rescue and no hassle , got a new one in no time. Hopefully this time it will last.
Good: 3 into 1 mix, 1 to 3 mix , 1 to 2 effects parallel blending possible.
i use it for the following 1 guitar send 1 to blackbird pre/dis blended with boss cp1x to Marshal
Like this very much but the first one I got became faulty and I had to have it replaced , Thomann to the rescue and no hassle , got a new one in no time. Hopefully this time it will last.
Good: 3 into 1 mix, 1 to 3 mix , 1 to 2 effects parallel blending possible.
i use it for the following 1 guitar send 1 to blackbird pre/dis blended with boss cp1x to Marshal dsl 20 watt return ie. to power amp only and a home made switch to put it into the front end of Marshall as well. and just a clean signal from guitar , all of this goes via 2 notes captor x (16) into my synergy core so basically i get 3 signals with effects and 1 completely gtr only signal clean to the DAW via synergy core . all works very well, blackbird thru the power amp sounds great.
handling
features
sound
quality
1
1
Report

Report

S
Does what it says perfectly
Shriukan 23.10.2024
The Signal Blender works beautifully and is super easy to work on. The only reason I am taking away a star is due to the Phase inversion it has when any one of the switches is on. It would not be a problem if the Clean channel has a phase switch button as well or simply didn't flip the phase.
Basically I have a DI (without a phase inversion switch) before it to keep a Dry signal and the Signal Blender is always on. They have inverted phases and I am going to get a Buffer pedal with phase inversion because I don't trust every sound tech to read the Rider.

Other than that, great tool to have in your arsenal.
The Signal Blender works beautifully and is super easy to work on. The only reason I am taking away a star is due to the Phase inversion it has when any one of the switches is on. It would not be a problem if the Clean channel has a phase switch button as well or simply didn't flip the phase.
Basically I have a DI (without a phase inversion switch) before it to
The Signal Blender works beautifully and is super easy to work on. The only reason I am taking away a star is due to the Phase inversion it has when any one of the switches is on. It would not be a problem if the Clean channel has a phase switch button as well or simply didn't flip the phase.
Basically I have a DI (without a phase inversion switch) before it to keep a Dry signal and the Signal Blender is always on. They have inverted phases and I am going to get a Buffer pedal with phase inversion because I don't trust every sound tech to read the Rider.

Other than that, great tool to have in your arsenal.
handling
features
sound
quality
1
1
Report

Report

PG
Classic OBNE quality, multiple options
Pol GF 06.09.2021
Great pedal, can be used in many ways outside your pedalboard, it's good tool to have around the studio and live.
handling
features
sound
quality
0
0
Report

Report

G
Limited use
Ghorille 23.12.2024
This would have been a perfect product if it has a "trails feature". As it is, any reverb tails or delays are cut off when you bypass a loop. You could return into channel B, but then it's just a space wasting one channel device.

Which makes the use cases very limited, effect loops with pedals that have mix knob most of the time anyway, signal splitter with no gain or a 3 channel mono mixer.

I think it would have been more useful if only the send was bypassed by default.
This would have been a perfect product if it has a "trails feature". As it is, any reverb tails or delays are cut off when you bypass a loop. You could return into channel B, but then it's just a space wasting one channel device.

Which makes the use cases very limited, effect loops with pedals that have mix knob most of the time anyway, signal splitter with
This would have been a perfect product if it has a "trails feature". As it is, any reverb tails or delays are cut off when you bypass a loop. You could return into channel B, but then it's just a space wasting one channel device.

Which makes the use cases very limited, effect loops with pedals that have mix knob most of the time anyway, signal splitter with no gain or a 3 channel mono mixer.

I think it would have been more useful if only the send was bypassed by default.
handling
features
sound
quality
0
0
Report

Report

Did you know?

Guides
Modulation Effects Pedals