Rockboard Flat XLR Cable 30 cm

XLR Cable

With rectangular cross-section and flat XLR plugs
XLR plugs fit through the slot grid on the RockBoard pedal boards
Flat, rectangular cable profile prevents cable breakage and kinks
Gold-plated contacts
Polyethylene (PE) signal insulation
2 Flexible copper conductors: 20 x 0.12 mm
Wound copper shield: 64 x 0.12 mm
Dimensions of male connector (L x W x H): 40 x 24 x 18 mm
Dimensions of female connector (L x W x H): 43 x 24 x 18 mm
Length: 30 cm

30-Day Money-Back Guarantee

Available since November 2020

Item number 507363

Sales Unit 1 piece(s)

Length 0,3 m

Colour Black

Connector 1 XLR 3-pol female

Connector 2 XLR 3-pol male

Connector from XLR 3-pin female

Plug out XLR 3-pin male

Show variations of this product

Rockboard Flat XLR Cable 30 cm

Rockboard Flat XLR Cable 30 cm XLR Cable * With rectangular cross-section and flat XLR plugs * XLR plugs fit through the...

174 kr

to the product

Rockboard Flat XLR Cable 60 cm

Rockboard Flat XLR Cable 60 cm XLR Cable * With rectangular cross-section and flat XLR plugs * XLR plugs fit through the...

180 kr

to the product

174 kr

Including VAT; Excluding kr200 shipping

119

Sales Rank

in Patch Cables

This is what customers who viewed this product bought

Rockboard Flat XLR Cable 60 cm

180 kr

bought

the sssnake SK233-0,3 XLR Patch

50 kr

bought

EBS PG-28 Flat Patch Cable Gold

109 kr

bought

EBS PCF-DLS58 DLX Flat TRS New

115 kr

19 Customer ratings

5 10 Customers 4 4 Customers 3 2 Customers 2 1 Customer 1 2 Customers

4 / 5

quality

Review guidelines

10 Reviews

High quality cable, but not fit for purpose

Eudeboy 30.12.2020

I bough this, under the impression it was compatible with Rockboard pedalboards, however it does not fit through the slotted grid of the Rockboard Quad 4.1. As a result I can't use it.
Like all Rockboard products, this is a very high quality item, however it does not meet it's primary design function. I would send this back, however it would cost too much post back to Germany from the UK, so it'll just have to go in the spares bin as it's too short to be used as a regular XLR cable.
Ultimately, if you want to an XLR cable as part of your pedalboard, I would advise others to look elsewhere for a solution that works.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Barely the right size

Kevin Hide Bass 05.02.2021

Interesting that this is marketed at being a cable made for the Rockboard, "flat" so that it fits through the hole unlike a regular XLR. They do, but you have to push, and I mean push, very very hard to get it through the hole. It is a very tight fit indeed, and you do feel like you're either going to damage the board or the plug pushing it through. Board is a Tres 3.1 bought in December, so a current model. Very strange. Otherwise, cable appears top notch in quality.

Report

They don't fit through the Rockboard properly

Owen K. 29.07.2024

The product description says they'll fit in the holes/slats - I assume they were measured to fit in an unpainted board, but when you try they actually scrape the paint off your Rockboard.

They're also extremely long connectors which really don't have a place on a pedalboard where space is at a premium. These stick out about 6cm from your pedal blocking the ability to put in any other pedals in that area. Rockboard should come up with a better solution, there are ultra compact XLR connectors now on the market, I'm buying those instead.

Report

Show translation

Show original

Unfortunately there was an error. Please try again later.

XLR Patch Kabel mit Schwächen.

el_murdoque 17.09.2021

Zunächst muss man sagen, dass es bei der Qualität von Kabel und Steckern nichts zu meckern gibt. Speziell die Einraste am weiblichen Teil funktioniert flüssig und wunderbar.
Wer das Teil für ein Rockboard kauft, sollte sich auf fiese Fummelei gefasst machen. In meinem Fall (Quad 4.1) kriegt man den Stecker durch eins der Löcher gepresst, aber nur im richtigen Winkel und mit einem Kraftaufwand, der an der Grenze zur rohen Gewalt liegt.
Mein eigentliches Problem mit diesem Kabel sind aber die Maße der Stecker. Wenn ich in meinem Beispielpedal, wo die XLR Buchse seitlich montiert ist, einen gewinkelten Neutrik Stecker einstecke, so steht der 2,7cm aus dem Gehäuse hervor.
Bei diesem Kabel hier endet der Stecker erst nach 4,4cm. Da das Kabel flach und flexibel ist, lässt es sich gut biegen, so dass wir da nur etwa einen Zentimeter hinzurechnen müssen. Links von meinem Beispielpedal brauche ich also 5,4cm Luft, um den Stecker benutzen zu können. Auf dem Platz kann man ein 1590a Pedal unterbringen!

Das Teil geht auf jeden Fall zurück und ich werde mir ein Kabel mit Neutrik Winkelstecker konfektionieren.

Report

Read all reviews

Rockboard Flat XLR Cable 30 cm

XLR Cable

This is what customers who viewed this product bought

19 Customer ratings

You have to be logged in to rate products.

10 Reviews

Smart Navigator

Served with love!

Rockboard Flat XLR Cable 30 cm

XLR Cable

This is what customers who viewed this product bought

Accessories & matching items

19 Customer ratings

You have to be logged in to rate products.

10 Reviews

Compare options

Smart Navigator