To the page content

SPL Goldmike NT1-A Recording Set

Bundle offer comprising

SPL Goldmike 9844

2-Channel Tube Pre Amp with Class-A Technology

The sound quality of the two-channel device is shown to its best effect when particularly recording vocals or acoustic instruments. High precision and naturalness help every vocal timbre to develop fully and emphasise the sound character of acoustic instruments. Since even the differences of the used microphones are shown clearly up to the finest nuances, the Goldmike gives a lot of room to experiment.

The lively sound quality and extreme low noise predestine the Goldmike for digital recording. The dual-mono construction of the class A tube amp guarantees a perfect channel separation and thus enables high spatial imaging for stereo recordings from piano to choir.

With the Goldmike reinforcements up to 72 dB are possible. A full tube preamp can’t reach those values. The tube/ IC design of SPL, however, combines the tonal qualities of tubes (improved spatial imaging, high in detail, pleasant soft focus) with high, very linear amplification performance and excellent common mode rejection. Thus the Goldmike is the perfect pre amp, even for high-end HD recording, as the dynamic range of 111 dBu proves: This value is above the, in practice, achieved values of 24-bit recording.

Equipment: The FLAIR circuit enhances the presence and clarity of the signal and allows sound optimisation while recording in particular for voices.

In addition, the Goldmike has a high pass filter at 50 Hz, phase reverse switch, 30 dB pad, 48 V phantom power with separately filtered power supply, high quality Alps potentiometers, crackle-free switches, five LEDs for each channel, two illuminated VU meters, star point grounding for best sound quality, thick conductors for stable voltage supply, a complex filtered power supply (6000 µF in the main power supply, 400 µF in tube power supply), symmetrical XLR inputs and outputs as well as unbalanced jack outputs. The ground-lift circuit helps to avoid ground loops.

  • Dynamic Range 111 dB
  • Reinforcements to 72 dB
  • Two separate mono pre amplifiers
  • Suitable especially for HD recording
  • 48V phantom power
  • Phase reverse switch
  • Pad function
  • Low cut filter and "FLAIR" circuit
  • Improved vocal presence
  • Very clear, warm sound
  • XLR Mic input
  • XLR Line out symmetrical, 6.3 mm jack unbalanced line out
  • 19" Rackmount 2U

Rode NT1-A Complete Vocal Recording

Vocal Recording Set

Delivery contents:

  • Rode NT-1 A large diaphragm microphone
  • Deluxe SM6 shock mount with integrated fabric pop shield
  • 6 m XLR cable
  • Dust bag
  • Suitable case: Art. 486805 (not included)

Technical data NT1-A:

  • 1" Large diaphragm microphone
  • Polar pattern: Cardioid
  • Frequency response: 20 - 20,000 Hz
  • Max. sound pressure level: 137 dB
  • Output impedance: 100 Ohm
  • Gold-plated output contacts
  • Dimensions (H x W x D): 190 x 50 x 50 mm
  • Weight: 326 g

Note: requires 48 V phantom power.

Available since July 2023
Item number 571351
Sales Unit 1 piece(s)
Tube No
Switchable Polar Pattern No
Omnidirectional No
Cardioid Yes
Figure-8 No
Low Cut No
Pad No
shockmount included Yes
USB Microphone No
Channels 2
Number of microphone inputs 2
Tubes 1
Phantom power 1
Phase Reverse 1
Analogue Outputs XLR, jack
Digitale Outputs None
Level Meter 1
Design 19" / 2U
Show more
8.599 kr
Free shipping incl. VAT
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1