To the page content

Tascam LM-8ST Line Mixer

56

19 "Line Mixer

  • 8 Stereo inputs with line level (6.3 mm jack, balanced)
  • Additional Mic / Line input in channel 1 (XLR, balanced)
  • 2 Stereo outputs (ST1 and ST2 / AUX, XLR sym. Cinch or unsym.)
  • Stereo inputs can be added to any stereo output independently
  • Input level per channel switchable +4 dBu and -10 dBV (backside)
  • Signal and overload indicators in each channel
  • 4-LED stereo level indicators in the two outputs
  • Stereo outputs switchable to mono
  • Headphone output with selectable source (ST1, ST2 / AUX)
  • Balanced master output and input, for cascading multiple devices
  • Grounding clamp and ground-lift switch
  • Dimensions: 482 x 44 x 280 mm
  • Weight: 3 Kg
Available since September 2010
Item number 242683
Sales Unit 1 piece(s)
simultaneously used channels 8
Mic-In 1
Stereo-In 8
Master Out XLR
Pre Aux max. 0
PC-Interface No
Multitrack-Recording No
USB/SD Direct Record No
Effect Processor No
USB Play No
Bluetooth Play No
Zones 2
Width 482 mm
Height 44 mm
Depth 280 mm
altezza 44 mm
Weight 3,8 kg
Parallel usable Channels 8
Mic Ins 1
Mono Line-in 8
Mono Line Ins 8
Stereo Ins 8
Hi-Z Input 0
Phantompower No
Phantom Power No
Aux Ways 1
Number of Pre Aux max. 0
PC Interface No
Audio Interface Input 0
Audio Interface Output 0
USB/SD Direkt Record No
Racklight Connector No
Lamp Connector No
Foot switch No
Foot Switch No
Matrix Mixer 1
19" Rackmount Yes
Rackmount Yes
110V Power Supply Yes
works with 110V 1
Case Thomann No
Case Thon 103456
Bag 212459
Show more
6.111 kr
Free shipping incl. VAT
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

56 Customer ratings

4.4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

39 Reviews

M
Great for guitar players as well
MD2 08.07.2020
I use this for an FRFR rig combined with a traditional poweramp/cab rig. I have quite a few modelers and their XLR outs with IR/cab emulation are mixed in the ST1 section of the mixer which then feeds my studio monitors. ST1 also provides a headphones out so I don't have to unplug and replug between different modelers. The 1/4" outs of my modelers are mixed in the ST2 section of the mixer which feeds the regular poweramp/cab. This mix does not contain any IR/cab emulation. With this mixer, it streamlines my workflow in the studio quite well. The mixer is fairly quiet and does not add any noise unless you go way beyond unity level. My only wish is that it accommodated unbalanced signals, but I can survive.
handling
features
sound
quality
2
0
Report

Report

S
SHOK 27.08.2017
Fantastic line mixer, I think this is the only one on the market that allows 2 outputs routing option, which is really great for sending the signal to an effect unit. I use it for mainly for keyboards, and it has replaced my analog mixer in only 1 rack ! Very serious build quality, 8 (stereo) channels, excellent product !
handling
features
sound
quality
2
0
Report

Report

M
Worst experience ever…!?
Musicol 08.04.2023
I bought this to handle my rack of keyboard modules, some Alesis S4 Plus’s, a Hammond organ module and some Roland XV3080s. These modules are probably all over 20 years old but are reliable and perfect for what I need. Spending over £400 for a 1U mixer meant that this would be the newest and most expensive thing in the rack! After 8 months, one of the stereo outputs of the mixer developed a buzz on both left and right channels. As it was under warranty I sent it back to Thomann for repair. About 2 months later I got it back, but the same fault was still there... it seemed they had done nothing to repair it! Due to work commitments I had to soldier on with it, just using the alternative stereo outputs. The warranty period expired before I was able to return it again to get fixed again. Now around 6 months later, both of the other two XLR outputs have failed as well. So now channel 2 XLR outputs have got an awful buzz on them and channel 1 XLR outputs have stopped working completely. All I’m able to use now is the unbalanced Jack outputs. While all my vintage modules and keyboards keep on working fine, a brand new, supposed quality mixer has failed miserably with various faults within 18 months, and I couldn’t even get it repaired properly within the warranty period. In the meantime, my much cheaper Samson SM10 mixer has done the job fine in my other module rack and when I’ve needed it as a temporary replacement in this one. Tascam and Thomann didn’t deliver their usual quality with this purchase. GRRRR!
handling
features
sound
quality
6
0
Report

Report

Z
Above and beyond expectation!
Zamy_u 08.11.2021
Bought it to add to my Sound system rack for extra line channels but ended up using it for all sorts.. fx sends, independent monitoring, even as a stand-alone mixer in a performance .. the use is endless due to the independent ST1 and ST2 channels
handling
features
sound
quality
0
0
Report

Report