To the page content

22.11 - 02.12

cyberweek-deal

Arturia Keystep

457
Thomann Cyberweek Deal

Klevgränd Speldosa for free!

If you purchase this product by 15-01-2025, Klevgränd will gift you a licence for Speldosa with a value of EUR 9,00 for free on top, so you have those pre-Christmas sounds ready to go!

Master Keyboard

  • 32x Velocity-sensitive keys (Slimkey)
  • With aftertouch
  • Integrated polyphonic step sequencer
  • Up to 64 steps and 8 simultaneous notes per step
  • 8-Mode Arpeggiator
  • Chord Play mode
  • Transport buttons
  • Pitch and modulation touch fader
  • Colour: White
  • Input for 9 V DC 0.5 A power supply (not included)
  • Weight: 1.83 kg

  • USB
  • MIDI In / Out
  • CV / gate output
  • Sync input and output
  • Sustain pedal input
Available since July 2016
Item number 380937
Sales Unit 1 piece(s)
Aftertouch Yes
Split Zones 0
Layer function No
Pitch Bend / Modulation Yes
Rotary Encoder 0
Fader 0
Pads 0
Display No
MIDI Interface 1x In, 1x Out
Sustain Pedal Connection Yes
USB-port Yes
Mains Operation Yes
Battery Operation No
Bus-Powered Yes
Dimensions 485 x 36 x 145
Weight in kg 1,4 kg
Special Features int. polyphone Step Sequenzer, CV/Gate Out, Arpeggiator
Show more
1.790 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

Here comes the Keystepper

The Arturia Keystep is a highly versatile and portable controller that seamlessly adapts to both digital and analogue setups. The Keystep boasts an impressive range of features, including Arturia's own Slimkey keybed with velocity and aftertouch, a fully fledged MIDI step-sequencer and arpeggiator for both hardware and DAW environments, and CV/Gate outputs which allow the Keystep to directly communicate with analogue synthesizers, modular systems, and drum machines.

Arturia Keystep master keyboard

Control and creativity

As mentioned above, the Arturia Keystep packs three devices into one: A master keyboard, a step sequencer, and an eight-preset arpeggiator. The Keystep can store up to eight sequences of up to 64 steps, to which chords can be easily assigned thank to its eight-voice polyphony. What is more, Arturia has given special attention to live performance ergonomics: Sequences be easily created and modified on the fly, with very intuitive control over note length and swing level – and most manipulations can be performed while the sequencer is active, thus ensuring seamless transitions during the performance. The Keystep also features a transport panel with tap tempo capabilities, capacitive-touch pitch bend and modulation wheels, and even a sustain pedal input.

Arturia Keystep connections

Connectivity at heart

Connectivity and efficiency are where the Arturia Keystep truly shines: It is compatible with practically all existing synthesizers, whether analogue or digital, hardware or software, and can effectively pilot complex hybrid electronic setups. It features both DIN and USB MIDI ports, for communication with virtual instruments as well as hardware synthesizers. The CV/Gate outputs (Gate out, Pitch CV out, and Modulation out), send pitch and gate signals along with velocity, aftertouch, or modulation ribbon signals to any analogue instrument or modular system, and can also serve as a MIDI/CV converter. The Keystep also offers many advanced MIDI settings as well as customisable editing options, allowing each user to further "tweak" his or her performance.

Slimkey keyboard on Arturia Keystep

About Arturia

Arturia's success story began with software emulations of well-known analogue synthesizers such as the Moog Minimoog, Sequential Prophet-5, and Oberheim SEM. The popular software instruments included in the V Collection are still flagship products of the French developer today. Over time, Arturia has gradually expanded its range and now also offers a host of hardware devices, ranging from synthesizers and keyboard controllers to sequencers. Since then, the former software developer has thus also become a household name in the world of analogue synthesizers and other equipment.

A bridge between two worlds

Users should not be deceived by its "pocket keyboard" appearance, because the Arturia Keystep is a miniature powerhouse in disguise! Its 32 keys are equally at ease with the virtual instruments of a DAW as they are with hardware synthesizers, and its CV/Gate outputs bridge the world of MIDI with that of modular analogue synths. The intuitive nature of the built-in sequencer, the depth control made available, and the awesome connectivity allow new levels creativity to be reached, and all with amazing simplicity. This "pocket keyboard" punches way above its weight!

457 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

quality

275 Reviews

A
Definitely worth purchasing! Excellent source of inspiration and fun
Anonymous 02.09.2016
Obviously this is a ridiculously long review so the TL;DR version :: The KeyStep has a couple of bugs and a few minor things to improve on, but overall for the price, it's excellent! ::

I really wanted a BeatStep Pro but there were just too many bad reviews about bugs etc so took a risk on this instead.
Don't let what you've read on the BeatStep Pro put you off this! (Not bashing the BSP - it just sounds a little too risky right now for my liking. I may well pick one up eventually)


So I updated the firmware on the KeyStep before anything else. For reference, this was to Firmware version 10.0.0.5

First issue - my KeyStep wasn't saving for the first 3 days. I had actually come to the conclusion that it was like this by design and I had misunderstood what I read before buying, and figured the Control Centre must be used if you want to save. It was already on the latest firmware and I didn't change what I was doing or any settings in the Control Centre but it just started saving all of a sudden, and has worked since. Strange and a little concerning, but great now that it's auto-saving.

I avoid using a PC as much as possible with my music setup, since I spend the rest of my life on one, so didn't look in depth at the Control Centre but it looks fairly self-explanatory and nicely laid out.

The arp is lots of fun and works perfectly well. No problems there. It is what it is. Hold one key down and keep adding to the pattern in the order set by the knob.

The mod and pitch strips are very responsive and work well. There's no indicator to show where you are on the mod strip though.

It really bothers me that there's no power switch. Why, Arturia? Whhhyyyy???

The KeyStep quality/build is very good - it's solid and has nice weight (it has a metal plate on the base). The keys are an ok size and don't really 'need' to be full size given what it is, so it's fairly small and portable.. however...

I personally don't need it to be portable since it doesn't move from the home studio. I use a Korg K49 MIDI controller, which has full size keys, for all my gear and it will play the instrument's sound via the KeyStep but the Arp or sequencer can't be triggered using the K49 MIDI controller - you must use the KeyStep keys directly. Bit disappointing, but you can play on top of the arp/sequence with the midi controller without affecting either pattern and can get some interesting results. (Same effect as playing the instrument directly while the KeyStep is running).

The sequencer does what it's supposed to, and being able to switch MIDI channel easily is great - I have this connected to a MIDI splitter (Miditech MIDI Thru 4/Filter) and running into a Korg Volca Bass, a Volca Beats, an Access Virus C and a Novation Bass Station 2. All four of these devices already have either a sequencer, arpeggiator, or both, but it's great to be able to throw the arp or sequencer pattern from the KeyStep at any of the devices. I can try out the same KeyStep pattern on each with the quick push of shift+midi channel key. Playing both the inbuilt sequencers/arps and the one from the Keystep at the same time can be interesting! Endless fun and great for inspiration.

One thing I found which is great and unexpected (and more probably a Korg Volca plus than a KeyStep one but) you can hit record on the Volca and press play on the KeyStep, and the arp or sequence will be recorded! The point is, even though the Volcas have sequencers and are quite capable, the KeyStep goes together with them really well!

One big enough problem I have with it is you can't set sequence length directly, and can't real-time record (as such) to set the length. You can only 'real-time' record over a sequence, once a sequence has already been stepped in -- So it's only a type of step-record which can be updated live once there an existing sequence to update. You can work around this using rests to set sequence length and then playback in time with the clock tempo (such as a drum machine), but it's not ideal and doesn't work every time. I find it doesn't catch some of the rests pressed half the time, so when you add sound, the sequence isn't nearly as long as you thought it would be given how many times you pressed the rest button.
This definitely needs an update.

The KeyStep has randomly crashed on me about 5 times since I got it - it just locks up out of nowhere ..completely unresponsive, and needs to be power cycled (but...NO POWER SWITCH!?). Not great, but I suppose not a huge problem for me as I use it for my own amusement only - probably not too good though if you were using it live to entertain a venue full of people. The crashing occurred both on PC connection and plugged into a standard USB charger. I don't have a 9V power supply to try it with but not sure it would make any difference to the crashing. Perhaps whatever is causing the crashing will be addressed in an update soon, or it might just be my one that does this, I don't know.

The MIDI Control Centre is nice and straight forward, although I don't like how it saves a new entry on every sync, and single clicking on the saved items shouldn't auto load them. A minor annoyance.

I have it taking clock from a Roland TR-8 so don't use tempo knob on the KeyStep but it holds clock time perfectly well.

I'm only using 5-pin midi in and out, not cv or sync, so others will have to give their findings on those. I had briefly used the sync out to connect to a Volca, which worked okay but I needed clock to go through the MIDI out and sync simultaneously which it doesn't do (you must push the tiny switches at the back and select one or the other (or internal or USB) but not both at the same time...so I had to rethink my connections. Not a fault obviously though. It's by design, so just to inform in case you had the same idea.

It's got aftertouch, transpose, hold, 8 note poly sequencing! You probably know that if you're looking at buying one but I think it needs to be emphasised.


So ..despite any of the issues I've encountered (which is why the 4 stars on handling & total), personally I still find it well worth the purchase and a lot of fun. It really enhances my setup and gives me fresh ideas and inspiration constantly and is at a great price!


And finally, great service from Thomann as usual!!
20
0
Report

Report

M
Unnecessary annoyances
Morphik 17.07.2019
I needed a simple keyboard to connect either to a computer, a MIDI instrument or a modular synth. This one has all the connections needed, this a a pro. The keys seem to be good quality (I'm not a 'real' keyboard player, so I can't tell).
The cons, yet, are quite a few :
- If you want to change the control voltage setting, or any setting, you need to sign in to their website, download a software, generate a file, save it to an USB drive, go offline, plug your keyboard into your computer, upload the generated file, etc. I'm not sure if I'm accurate enough, this is so complicated I'm not sure I understood everything. And of course, there's no Linux version. Why not an open source software ? The thing is only a micro-controller with a few keys and knobs, not a jet fighter !
- When you change the octave setting, the button flashes bright white.
This is distracting and can't be changed, even with their software center thing. Users complain, but the company does nothing.
- The firmware hasn't been updated for three years. While it only leaves you with a few annoyances like the flashing buttons, it's a clue that they're in no hurry to provide customer service.
handling
features
quality
12
2
Report

Report

n
high quality feel
nullvoid 03.04.2022
this midi controller does what is claims, overall good build and functionality, however mind that the keys are a little heavy
handling
features
quality
0
0
Report

Report

SU
Love my first Arturia
Serkan U 19.04.2022
This is my first Arturia controller. I've purchased the Keystep to control my Digitone, Digitakt and other Synths connected to them.

I love the feeling of the keys; much better than some other controllers out there on the market. Also, the arpeggiator is very useful.
This is an excellent controller for both recording and performing.
handling
features
quality
0
0
Report

Report

YouTube on this topic