Doepfer A-148 Dual Sample And Hold

Euro Rack Module

Dual Sample & Hold
Two separate sample/hold circuits
Euro rack format
Power requirements: +20 mA (+12V) / -20 mA (-12V)
Width: 4 HP / 20.0 mm
Depth: 30 mm (measured from the rear of the front panel)

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since June 2005

Item number 182936

Sales Unit 1 piece(s)

Width 4 TE / HP

Show variations of this product

Doepfer A-148 Dual Sample And Hold

Doepfer A-148 Dual Sample And Hold Euro Rack Module * Dual Sample & Hold * Two separate sample/hold circuits * Euro rack...

822 kr

to the product

132

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

1.129 kr

to the product

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

1.269 kr

to the product

119

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

444 kr

to the product

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

2.799 kr

to the product

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

758 kr

to the product

Doepfer A-101-2 Vactrol Lowpass Gate

Doepfer A-101-2 Vactrol Lowpass Gate Vactrol lowpass gate * Combination of low-pass filter (LP) and VCA * Based on the i...

1.269 kr

to the product

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

1.525 kr

to the product

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

1.529 kr

to the product

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

1.022 kr

to the product

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

1.269 kr

to the product

Doepfer A-180-3 Dual Buffered Multiple

Doepfer A-180-3 Dual Buffered Multiple Synthesizer module * Double buffered 1-in-3 multiple * For buffering and duplicat...

629 kr

to the product

822 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Sample and Hold Modules

This is what customers who viewed this product bought

Behringer 150 Ring Mod/Noise/S&H/LFO

Erica Synths Pico LFO / S&H

835 kr

bought

Joranalogue Audio Design Step 8

4.333 kr

47 Customer ratings

5 36 Customers 4 10 Customers 3 1 Customer 2 0 Customers 1 0 Customers

4.7 / 5

handling

features

sound

quality

Review guidelines

21 Reviews

A versatile little module

Zoë 10.03.2014

This module contains two identical parts, either of which can be set to either sample and hold or track and hold by moving its jumper. By default, you get one of each.

I'm not aware of just how much sample and hold units can vary in quality, although this pair certainly does the job. When it comes to features, Doepfer comes out on top again, as track and hold units are certainly rarer.

Using (A-118) white noise as a sample input and an LFO as a trigger input, you can create the random LFO setting found on classic monosynths like the Roland SH and Yamaha CS ranges. Being modular, you can also put it to other creative uses. For instance, it can emulate the sound of a low fidelity digital sampler, akin to bitcrushing, with a sample rate you can dynamically tweak.

This is one of those small, basic utility modules (along with the A-114 ring modulator and A-150 voltage controlled switch) that are about as useful as you are imaginative. They can greatly expand the possibilities of your A-100 just as long as you can use them creatively.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Hidden arpeggiator

Anonymous 26.10.2016

Most of us will think of a sample and hold in terms of random generated sounds from bleeps to gurgling streams but it can also be used to generate melodies and arpeggios.

I connect an lfo set to square wave as a trigger for sampling.
I use another lfo set to sine wave as sample input, play around with the frequency. The output is fed to either the cv in of a vco or the fm in of a vco if you have one. Play around with these as they give different effects. The key is to experiment with the lfo sample rate which takes you from arpeggio like patterns to random patterns. That's just with one of the sample and hold sections and we have two to play with and the only limit there is your imagination. Thanks Doepfer!

Report

I love it

Anonymous 10.04.2022

Interesting modulo, with 2 posibilities: s&h and t&h

handling

features

sound

quality

Report

Not Sexy but still desirable.

Renato Q. 03.09.2014

While it's not the most glamourous of modules it represents and area where Doepfer excels, the basic building blocks. The module is straight forward, something rare in the Eurorack world, and yet still has all the features you need to get great sounds. The secret ability to bitcrush with this module makes it a keeper!

Report

Read all reviews

Doepfer A-148 Dual Sample And Hold

Euro Rack Module

This is what customers who viewed this product bought

47 Customer ratings

You have to be logged in to rate products.

21 Reviews

Smart Navigator

Served with love!

Doepfer A-148 Dual Sample And Hold

Euro Rack Module

This is what customers who viewed this product bought

Accessories & matching items

47 Customer ratings

You have to be logged in to rate products.

21 Reviews

Compare options

Smart Navigator