Harley Benton Fret Rocker

379

Start 360°

Guitar Tool

An indispensable universal tool for the precise adjustment of fretted instruments
Precise measurement and comparison of fret heights before levelling the frets and adjusting the truss rods
4-in-1 straight edge for displaying uneven fret heights for three frets each
Laser-cut from steel

30-Day Money-Back Guarantee

Available since August 2020

Item number 492565

Sales Unit 1 piece(s)

64 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Guitar Tools

This is what customers who viewed this product bought

Harley Benton Parts String Action Gauge

64 kr

10%

bought

Harley Benton Notched Straightedge Guitar

325 kr

bought

Harley Benton Feeler Gauges

64 kr

bought

Harley Benton Nut File Set

129 kr

379 Customer ratings

5 241 Customers 4 68 Customers 3 29 Customers 2 16 Customers 1 25 Customers

4.3 / 5

quality

Review guidelines

232 Reviews

Edge is not even

Mostro 28.07.2021

The longer edge is not even, it is as if the cut it from another piece of metal on that side and the did the cut wrong, so it jumps a uneven, if that makes sense. still if you take care measuring inside the area before the cut, you can get away with it. Bad quality, look for something else.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Rough but it works.

MacGee 10.09.2022

Bearing in mind this product was very cheap so my expectations were low.
However, I was pleased to find that when I checked the edges they were flat. At least when I checked it with an engineer's ruler I couldn't see any gaps whatsoever.
However, where this product isn't so good is the finishing quality. The burring on the cut edges is sharp. This need to be carefully sanded/smoothed before use. You could cut yourself or damage your frets.
But this was ok for me as the main function of straight edges was achieved and a bit of smoothing for a cheap unfinished product can be expected.
Recommended for anyone on a tight budget who doesn't mind finishing off the product.

Report

Not machined properly...

mystovski 25.01.2024

The point of spending money on a fret rocker is that it's supposed to be straighter than a random object like for instance, a credit card. Unfortunately this one is machined very poorly and it's just not fit for the purpose. The sharp edge is slightly bent, which looks a bit like they used a blunt tool to cut it. What is good about it? You can take some sanding papers and try to even out the edges by putting a sanding paper on something very flat like a window glass. This shouldn't be too difficult. But should it come like this? Hell no.

Report

Does the job

Curt R 11.10.2020

I'm not a luthier or guitar tech. I just need something cheap and cheerful to check the frets on new guitars to see which ones need to go to the tech for fretwork.

Does the job. There is a little tiny line protruding, on the longest side, where it looks like the machine cut started and finished. This isn't really a major issue, as long as you don't put that bit on the fret!

I was worried about it having sharp edges, as it's so cheap, but the edges are ever so slightly rounded off, so very little risk of cutting your fingers with these.

I'd recommend it, for the money.

Report

Read all reviews

Harley Benton Fret Rocker

Guitar Tool

This is what customers who viewed this product bought

379 Customer ratings

You have to be logged in to rate products.

232 Reviews

Smart Navigator

Served with love!

Harley Benton Fret Rocker

Guitar Tool

This is what customers who viewed this product bought

Accessories & matching items

379 Customer ratings

You have to be logged in to rate products.

232 Reviews

Compare options

Smart Navigator