To the page content

MXR M 239 Mini Iso-Brick

50

Multi-Power Supply for Effects Units

  • Max. total power 2,000 mA
  • All 5 outputs are completely isolated
  • Separate status LED for each output
  • 4x 9 V Outputs, each with 300 mA
  • 1x Output with selectable voltage (9V/18V) loadable with 800 mA
  • Input voltage: 18V DC 2,000 mA
  • Aluminium housing
  • Incl. 5x power cables (angled/straight barrel connector, 2.1 x 5.5 mm), 1x power splitter cable (barrel connector, 2.1 x 5.5 mm) and 1x 18 V DC 2,000 mA (Dunlop ECB 009) power supply (2.1 x 5.5 mm hollow plug, negative polarity inside)

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

Available since March 2019
Item number 459673
Sales Unit 1 piece(s)
DC/AC current AC/DC
Output current in mA 2000 mA
9 V Yes
12 V No
18 V Yes
Secondary voltage No
Multi-output power supply Yes
1.522 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

50 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

33 Reviews

j
Good powersupply for a small but demanding pedalboard
jondelange 17.03.2022
The isobrick delivers clean power and immediately fixed the buzzing sound in my pedal chain. It's built sturdy and because it's pretty light I was able to fixate it underneath my pedalboard with the same velcro I use for my pedals.
One small issue I have to address is that when you move your pedalboard around, some of the cables might get a bit loose because the fit isn't very tight, so you have to check your connections after moving your board.
So with just one small easily fixable issue aside, this is a great powersupply that easily supplies enough power for some powerhungry pedals like my plethoraX5 and Source Audio Aftershock
quality
0
0
Report

Report

U
Awesome
Umby 17.09.2019
This power supplier is really awesome!
You can place it in smaller spaces without problem. (ex Nano pedaltrain)
It offers 4 9V power slots plus an additional 9V/18V switchable slot.
I used it for hours under super hot conditions and it never failed.
I would recommed it to everyone
quality
2
0
Report

Report

i
Tiny but powerful.
ilikeinstruments 20.03.2022
With roughly half the size of a deck of cards it's been powering 4 pedals (2 of them being multieffect) with ease without failing or becoming a hot potato.
quality
0
0
Report

Report

LJ
Small but works well
Little Jay 11.04.2021
Very nice small power supply for small boards. Takes even less space than a mini-pedal. Of course you have an external power supply (adapter) that goes into the wall outlet. The cable of that could have been a bit longer. It's now 1.5 meters or so, so you need an extension chord in most situations. Would have been great if they had added another meter of length.

The brick does what it's supposed to do, in my setup without any unwanted noises. It seems very sturdy and delivers plenty of milliamps. It powers 9 pedals on my board (I use a daisy chain for all the drive pedals and the isolated outputs for delay, chorus, phaser and tremolo.) The supplied cables are a bonus, the angled plugs are practical. I used a daisy chain of my own, since that was not supplied.

Funny detail: the white on/off LED was so bright I had the put a drop of nail polish on it to dim it.

I am happy with it!
quality
0
0
Report

Report