Rean NYS 207

495

Start 360°

Jack

2 Pole
Right angle
Height: 6.35 mm
Max. Cable diameter: 6 mm
Metal housing and plastic kink protection
Made by Rean (registered Trademark of Neutrik AG)

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since February 2008

Item number 201815

Sales Unit 1 piece(s)

Installation No

Mono/Stereo Mono

Angled Yes

Type TS (mono/unsym.)

Plug Jack 6,3 mm TS male angled

Show variations of this product

495

Rean NYS 207

Rean NYS 207 Jack * 2 Pole * Right angle * Height: 6.35 mm * Max. Cable diameter: 6 mm * Metal housing and plastic kink ...

16,70 kr

to the product

258

Rean NYS 202

Rean NYS 202 Jack Plug * 6.3 mm Jack * Stereo plug * Chrome-plated * Max cable diameter: 6 mm * Made by Rean (Registered...

20,60 kr

to the product

292

Rean NYS 201

Rean NYS 201 Connectors * Jack mono * For cable with diameter of up to 6 mm * Made by Neutrik (Rean)...

15,40 kr

to the product

272

Rean NYS 208

Rean NYS 208 Jack Plug * 6.35 mm, angled * 3-pin * Maximum cable diameter: 6 mm * Metal housing and plastic collet for k...

21,90 kr

to the product

Rean NYS 204

Rean NYS 204 Jack Plug * 6.3 mm * Stereo * Black plastic handle with flexible strain relief * For cables with diameter o...

15,40 kr

to the product

16,70 kr

Including VAT; Excluding kr200 shipping

Sales Rank

in Jack Connectors (6,3mm - 1/4")

This is what customers who viewed this product bought

Thomann SK140 Jack mono Angled

495 Customer ratings

5 303 Customers 4 148 Customers 3 33 Customers 2 8 Customers 1 3 Customers

4.5 / 5

quality

Review guidelines

177 Reviews

Buy this if You need angle connector 6.3mm

Alexandr Mardari 11.05.2021

Buy this if You need angle connector 6.3mm.
I used such designed angled connector named with different brands.
It was always good, never broken. It looks not beautiful, but it is more sturdy than every another design connector in compare. Just does it job well and fits from thin to thick cables. I always use many circles of duct tape above cable attachment point using thin cables, after it is impossible to break the junction.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Neutrik Quality made in China

Anonymous 21.07.2014

I have used these plugs for several years now, soldering my own cables for my effects board and making instrument cables. The quality of these plugs is absolutely outstanding for this cheap price. I can hear or see no difference between these plugs and more expensive ones.

The only tricky part is soldering the mass contact to the plug, but with a little bit of excercise (probably after two or three cables), you will do just fine and have good, long lasting plugs for your instruments and effects for barely one euro.

You have to be careful though when using these plugs directly into your amplifier, because of the angled jack it sometims blocks other inputs (for example on my Laney IRT Studio)

Report

Anonymous 11.06.2015

Very high quality for a cheap plug. Also very easy to solder, does not need a large amount of heat. The plastic looks weak, but it actualy is not. I have soldered on hundreds of them already onto the cables I make with no complaints. They easily over-last the cables they are soldered on. Highly recommended!!!

Report

Very reliable

flivver 08.12.2017

If you need angled jack connector, this one is absolutely acceptable. Easy to solder, easy to assemble. So far very reliable.

Report

Read all reviews

Rean NYS 207

Jack

This is what customers who viewed this product bought

495 Customer ratings

You have to be logged in to rate products.

177 Reviews

Smart Navigator

Served with love!

Rean NYS 207

Jack

This is what customers who viewed this product bought

Accessories & matching items

495 Customer ratings

You have to be logged in to rate products.

177 Reviews

Compare options

Smart Navigator